Pro Audio & Multi Media Stands, Speaker Stands

Classic two-piece telescopic boom arm with 3/8" thread. Silent, scratchless swivel joint for adjustment of angle, easy tightening with T-bar locking screw. Boom arm: 2-piece telescopic design Boom arm length: from 435 to 745 mm Clamping: T-bar locking screw EAN: 4016842201617 Material: steel Threaded connector: 3/8" Type: black Weight: 0.59 kg

Sold as single stands! Attractive table stand for studio monitors and loudspeakers. The height adjustment is variable between 167 and 254 mm. 4 rubber pads each for floor and tray provide for stability and noise filtration. The recommended max. load is 15 kg. The support area (tray) dimensions are 150 x 170 mm. Base dimensions: 214 x 214 mm Bearing plate: 150 x 170 mm EAN: 4016842103737 Height: from 167 to 254 mm Height adjustment: continuous Leg construction: flat steel plate Material: steel Max. load capacity: 15 kg Product Category: Topline Special features: 4 rubber pads each for floor and tray provide for stability and noise filtration Type: structured black Weight: 3.06 kg

Classic two-piece telescopic boom arm with 3/8" thread. Silent, scratchless swivel joint for adjustment of angle, easy tightening with T-bar locking screw. Boom arm: 2-piece telescopic design Boom arm length: from 435 to 745 mm Clamping: T-bar locking screw EAN: 4016842201600 Material: steel Threaded connector: 3/8" Type: chrome Weight: 0.59 kg

In response to customer demand, we have designed a robust bag for our heavy round base. The tear-proof, high quality linen-look nylon fabric is also water-repellent. The bag has two strong hand straps to carry the 7.5 kg cast metal base. Dimensions diameter: 460 x 25 mm EAN: 4016842820740 Fastener: zip fastener Handle or carrying type: handle Material: nylon Suitable for: round cast-iron base diam. 450 mm Weight: 0.342 kg

Used for heavy microphones. Fits all one-piece K&M boom arms with 3/8" thread connector or tube diameter 15 mm. Easy mounting. Diameter: 46 mm EAN: 4016842809462 Height: 60 mm Material: steel Special features: used for heavy microphones Suitable for: one-piece K&M boom arms with 3/8" thread or tube diameter 15 mm Type: black Weight: 0.8 kg

Classic one-piece boom arm with 3/8" thread, and sliding adjustment through non-scratching swivel joint. Easy tightening with T-bar locking screw. Complete with locking washer and plastic handgrip. Boom arm: one-piece design Boom arm length: 800 mm Clamping: T-bar locking screw EAN: 4016842201495 Material: steel Threaded connector: 3/8" Type: black Weight: 0.8 kg

The practical projector tray can be used universally for projectors, monitors and for other equipment. The tray's dimensions are 420 x 380 mm. The flange adapter dimension is 36 mm and the clamp nut connects to the loud speaker stands or other stands with a corresponding tube diameter. Bearing plate: 420 x 380 mm EAN: 4016842825349 Function: to slip on stand Material: steel Product Category: Topline Special features: for projectors, monitors and for other equipment Suitable for tubing diameter of: 35 mm Type: black Weight: 3 kg

Classic one-piece boom arm with 3/8" thread, and sliding adjustment through non-scratching swivel joint. Easy tightening with T-bar locking screw. Complete with locking washer and plastic handgrip. Boom arm: one-piece design Boom arm length: 800 mm Clamping: T-bar locking screw EAN: 4016842806928 Material: steel Threaded connector: 3/8" Type: chrome Weight: 0.664 kg

Stable steel stand for monitors with broad completely level round cast-iron base-diameter 450 mm. Rod combination height adjustable using clamping screw and safety splint. For the direct attachment of monitors with 3/8" threaded joint (thread length 12 mm) or to screw in a connector plate 205 x 245 mm for Genelec monitor 1030 or monitors by other manufacturers. Includes 4 thread points and 4 rubber knobs. Base diameter: 450 mm Bearing plate: 245 x 205 mm EAN: 4016842805419 Height: from 950 to 1,430 mm Height adjustment: locking screw and safety pin Leg construction: round cast-iron base Material: steel Max. load capacity: 35 kg Product Category: Topline Rod combination: 2-piece folding design Special features: direct attachment of monitors with 3/8" threaded joint (thread length 12 mm) possible; support plate with 4 thread points and 4 rubber knobs; for stationary use Type: black Weight: 10.082 kg

A decorative speaker stand with a unique patented expanding mandrel system that provides a stable, tight and firm fit for speakers. The movable plastic splints provide for a vibration-free connection between the rod and the speaker. Connecting the speaker is easy and is done using the handy ring lock - which is simply placed in position and screwed on.. The heavy cast iron plate with a relatively small diameter requires little space. The tried-and-tested spring-loaded bolt with locking screw makes height adjustment easy and safe. The stand has a maximum pull-out height of 1.800 mm and is suitable for speakers with a maximum weight of 20 kg. Base diameter: 450 mm EAN: 4016842828128 Height: from 1,125 to 1,810 mm Height adjustment: spring-loaded bolt and locking screw Leg construction: round cast-iron base Material: steel Max. load capacity: 20 kg Product Category: Starline Rod combination: 2-piece folding design Special features: patented expanding mandrel system ?Ring Lock?; vibration-free connection due to moveable plastic splints Type: black Weight: 11.044 kg

A more compact version of the classic 210/2. The combination of the long-legged 201A/2 mic stand and the 211/1 telescopic boom arm. Like the 210/2, the 210/9 sets the standard for professional microphone boom stands. Bags to suit: 21421 Carrying case for 2 Mic Stands 21315 Carrying case for 6 Mic Stands Boom arm: 2-piece telescopic design Boom arm clamping: T-bar locking screw Boom arm length: from 435 to 745 mm EAN: 4016842201419 Height: from 900 to 1,605 mm Height adjustment: clutch Leg construction: socket with foldable legs Material: steel Product Category: Topline Rod combination: 2-piece folding design Size when folded: 105 x 85 x 985 mm Special features: stable and sturdy; zinc die-cast base Threaded connector: 5/8" Type: black Weight: 3.1 kg

Steel tube combination to connect satellite systems. With bottom M20 thread to attach connector plate 24116. Zero backlash and absolute vertical position. Height adjustment with spring-loaded locking screw and safety bolt. EAN: 4016842813773 Height: from 1,085 to 1,785 mm Height adjustment: spring-loaded bolt and locking screw Material: steel Rod combination: 2-piece folding design Special features: for precise fit; mounting aid included Type: black Weight: 2.96 kg

A decorative space saving speaker stand. The heavy cast iron plate with a relatively small diameter requires little space. The tried-and-tested spring-loaded bolt with locking screw makes height adjustment easy and safe. The stand has a maximum pull-out height of 1800 mm and is suitable for speakers with a maximum weight of 20 kg. The integrated mounting aid simplifies mounting the loud speaker cabinets. Base diameter: 450 mm EAN: 4016842810710 Height: from 1,100 to 1,810 mm Height adjustment: spring-loaded bolt and locking screw Leg construction: round cast-iron base Material: steel Max. load capacity: 20 kg Product Category: Topline Rod combination: 2-piece folding design Special features: speaker will be fixed with flange adapter; mounting aid included Type: black Weight: 10.44 kg

Decorative speaker stand with a flat steel plate, practical carrying handle and cable duct. The tripod is ideal for use where space is limited. The height is fixed with a safety hook and secured with a clamping screw with little noise and no play. The slim design of the clamp enables space-saving transport and ensures a discreet appearance. The usable height is between 1,135 and 1,835 mm and is reached in 5 steps of 140 mm. The patented expanding mandrel with quick-release fastener ensures that the loudspeaker box is firmly seated. The plastic expanding jaws ensure a vibration-free connection between the box and the tube. The maximum load when fully extended is 20 kg. set-up dimensions: 480x480mm Execution: black Special feature: patented expanding mandrel »Easy Lock«; Low-resonance connection through plastic spreader jaws EAN: 4016842119431 foot construction: cast base Weight: 13.2kg Height: from 1135 to 1835 mm Height adjustment: clamping screw and safety hook Material: steel Product category: star line Pipe end(s): »Easy Lock« ø 35 to 37 mm tube combination: 1x extendable Load capacity*: 20kg

A more compact version of the classic 210/2. The combination of the long-legged 201A/2 mic stand and the 211/1 telescopic boom arm. Like the 210/2, the 210/9 sets the standard for professional microphone boom stands. Bags to suit: 21421 Carrying case for 2 Mic Stands 21315 Carrying case for 6 Mic Stands Boom arm: 2-piece telescopic design Boom arm clamping: T-bar locking screw Boom arm length: from 435 to 745 mm EAN: 4016842201419 Height: from 900 to 1,605 mm Height adjustment: clutch Leg construction: socket with foldable legs Material: steel Product Category: Topline Rod combination: 2-piece folding design Size when folded: 105 x 85 x 985 mm Special features: stable and sturdy; zinc die-cast base Threaded connector: 3/8" Type: black Weight: 3.1 kg

Steel stand for monitors with 3-leg base, stable and solid. Height adjustable with a non-scratching locking screw and additional safety pin, internal cable routing possible. Bearing plate: 245 x 205 mm EAN: 4016842816224 Height: from 680 to 1,140 mm Height adjustment: locking screw and safety pin Leg construction: fixed screw-in legs Material: steel Max. load capacity: 35 kg Product Category: Topline Rod combination: 2-piece folding design Special features: internal cable routing possible; support plate with rubber bumps; for stationary use Type: black Weight: 4.75 kg

Heavy and sturdy base plate for all common distance rods and tube combinations with M20 threaded bolts. Additional useful features include a practical integrated handle, a cable management and four stable feet covered in felt. With the included wrench the tube combination can be setup to individual specifications. Dimensions: 550 x 550 x 27.3 mm EAN: 4016842827831 Material: steel Special features: heavy, flat steel plate; includes a practical integrated handle and a cable management Threaded connector: M20 Type: structured black, dimension: 550 x 550 x 27.3 mm, weight: 13.5 kg Weight: 13.5 kg

The external dimensions of the medium-sized base plate are 480 x 480 mm and it weighs 10 kg. All common distance rods and tube combinations with M20 threaded bolts can be used with this base plate. Additional useful advantages include a practical integrated handle, a cable management and four stable feet covered in felt. With the included wrench, the tube combination can be setup to individual specifications. Dimensions: 480 x 480 x 27.3 mm EAN: 4016842100583 Material: steel Special features: heavy, flat steel plate; includes a practical integrated handle and a cable management Threaded connector: M20 Type: structured black, dimension: 480 x 480 x 27.3 mm, weight: 10 kg Weight: 10 kg

The smallest base plate from the K&M series is only 410 x 410 mm in size and weighs 7 kg. Thanks to the integrated socket, the base plate is compatible with all common distance rods and tube combinations with M20 threaded bolts. Additional useful advantages include a practical integrated handle, a cable management and four stable feet covered in felt. With the included wrench the tube combination can be setup to individual specifications. Dimensions: 410 x 410 x 27.3 mm EAN: 4016842100439 Material: steel Special features: heavy, flat steel plate; includes a practical integrated handle and a cable management Threaded connector: M20 Type: structured black, dimension: 410 x 410 x 27.3 mm, weight: 7 kg Weight: 7 kg

Flat round base suitable for all common distance rods and rod combinations using a M20 threaded bolt. The diameter of the round base is 450 mm. Felt strips for floor protection are included. Optional carrying case 26751 is available. Diameter: 450 mm EAN: 4016842828142 Height: 21 mm Material: grey cast iron Special features: Felt strips for floor protection are included Threaded connector: M20 Type: structured black Weight: 6.7 kg

Low-priced all-metal-stand. Consists of tubing assembly, boom arm and zinc die-cast base with long folding legs. Square swivel joint with large wing nut. Boom arm: one-piece design Boom arm clamping: wing nut Boom arm length: 805 mm EAN: 4016842804627 Height: from 900 to 1,600 mm Height adjustment: clutch Leg construction: socket with foldable legs Material: steel Product Category: Baseline Rod combination: 2-piece folding design Size when folded: 105 x 85 x 960 mm Special features: zinc die-cast base Threaded connector: 3/8" Type: black Weight: 2 kg

The new star in your show! The avant-garde, one-hand microphone stand is setting new standards in design and function. The elegant combination of triangular-shaped sections and the new design of the slender one-hand adjustment mechanism go harmoniously with standard microphone clips and microphones. The integrated knurled screw is impossible to lose and makes tightening and positioning the microphone clip easy. The stand's simple elegance loses nothing by the addition of Konig & Meyer's classic swivel arm. The height of the stand can be adjusted soundlessly, simply and easily using the unique one-hand clutch. The stand is significantly lightweight, but nonetheless stable due to the ingenious round base with an integrated steel plate with an attractive plastic cover. The base's circumferential rubber profile reduces undesirable vibration and footfall noise even when the stand is tilted far over to the side. Damage to flooring (e.g. parquet) is also prevented. Base diameter: 275 mm EAN: 4016842823802 Height: from 1,055 to 1,735 mm Height adjustment: one-hand clutch Leg construction: round base Material: Aluminium Product Category: Starline Rod combination: 2-piece folding design Special features: triangular-shaped rods; knurled screw is impossible to lose; can be adjusted soundlessly, simply and easily; significantly lightweight, but nonetheless stable due to the ingenious round base with an integrated steel plate with an attractive plastic cover; circumferential rubber profile reduces undesirable vibration and footfall noise Threaded connector: 3/8" Type: black Weight: 3.06 kg

Significant Stand Point! The larger tubing reaches a height of 1.7 m and as such is well suited for taller individuals. The sleek clutch provides for user friendly height adjustment and it is easy to fix in place. A very heavy round cast-iron base with a diameter of 300 mm provides the stand with both exceptional stability and a small footprint. The circular rubber insert ring filters foot step sounds and reduces the transmission of unwanted sounds. The stand weighs 6.2 kg and is equipped with an extendable boom. Base diameter: 300 mm Boom arm: 2-piece telescopic design Boom arm clamping: T-bar locking screw Boom arm length: from 435 to 745 mm EAN: 4016842824762 Height: from 1,000 to 1,700 mm Height adjustment: clutch Leg construction: heavy round cast-iron base Material: steel Product Category: Topline Rod combination: 2-piece folding design Special features: slim clutch; tall tubing combination; big tubes provide a modern look and a superior stability Threaded connector: 3/8" Type: black Weight: 6.28 kg

Especially designed for studios and drummers. Taller and longer than most stands. Long legs fold for compact storage and easy transport. Boom arm: one-piece design Boom arm clamping: T-bar locking screw Boom arm length: 1,065 mm EAN: 4016842201334 Height: from 1,120 to 2,010 mm Height adjustment: clutch Leg construction: socket with foldable legs Material: steel Rod combination: 2-piece folding design Size when folded: 105 x 85 x 1,170 mm Special features: zinc die-cast base; extra high; longer legs Threaded connector: 3/8" Type: black Weight: 5.88 kg

Perfect presentation and function: this heavy duty, large round base microphone stand is impressive both for the studio and on stage. The robust and tall tubing combination with the slim clutch provide a very tight and secure connection. A full circle anti-vibration rubber damping ring prevents unwanted floor vibration impacting the sound. The formidable base scores additional points for its clean design, visually appealing plastic covering and advanced functionality - and the integrated metal plate makes the stand extraordinarily stable. In addition, due to the extremely solid and stable base, an extendable boom arm can also be installed on the stand. Base diameter: 275 mm EAN: 4016842823512 Height: from 1,000 to 1,700 mm Height adjustment: clutch Leg construction: round base Material: steel Product Category: Starline Rod combination: 2-piece folding design Special features: stable, lightweight metal round base with plastic cover; full circle anti-vibration rubber damping ring for noise filtration; large support area provides great stability Threaded connector: 3/8" Type: black Weight: 3.36 kg

The industry standard for a mic stand and boom arm combination. Package consists of the 201A/2 microphone stand and the 211 boom arm. Folding base for ease of transport. Long legs for added stability. The 210/2 - a classic for 30 years. More than 2 million sold. Boom arm: one-piece design Boom arm clamping: T-bar locking screw Boom arm length: 800 mm EAN: 4016842212200 Height: from 900 to 1,605 mm Height adjustment: clutch Leg construction: socket with foldable legs Material: steel Product Category: Topline Rod combination: 2-piece folding design Size when folded: 105 x 85 x 960 mm Special features: the industry standard; stable and sturdy; zinc die-cast base; designed for heavy use Threaded connector: 5/8" Type: black Weight: 3.13 kg

With the unique "Soft-Touch" one-hand clutch the height can be adjusted with a quick squeeze to easily raise and lower the mic. Sleek, flat, cast-iron base is very stable and durable. Quality black powder coating?is extremely durable. Base diameter: 250 mm EAN: 4016842806997 Height: from 1,060 to 1,790 mm Height adjustment: "Soft-Touch" one-hand clutch Leg construction: flat round cast-iron base Material: cast-iron base, rod combination made from aluminum Product Category: Topline Rod combination: 2-piece folding design Special features: anti-vibration rubber insert for noise filtration Threaded connector: 3/8" Type: black Weight: 3.15 kg

The industry standard for a mic stand and boom arm combination. Package consists of the 201A/2 microphone stand and the 211 boom arm. Folding base for ease of transport. Long legs for added stability. The 210/2 - a classic for 30 years. More than 2 million sold. Boom arm: one-piece design Boom arm clamping: T-bar locking screw Boom arm length: 800 mm EAN: 4016842212200 Height: from 900 to 1,605 mm Height adjustment: clutch Leg construction: socket with foldable legs Material: steel Product Category: Topline Rod combination: 2-piece folding design Size when folded: 105 x 85 x 960 mm Special features: the industry standard; stable and sturdy; zinc die-cast base; designed for heavy use Threaded connector: 3/8" Type: black Weight: 3.13 kg

This model has a round, heavy cast-base with a cut-out design that allows for stacking of up to 5 microphone stands. Height is adjusted with a comfortable clutch. Base diameter: 278 mm EAN: 4016842815104 Height: from 870 to 1,575 mm Height adjustment: clutch Leg construction: flat round cast-iron base Material: steel Product Category: Topline Rod combination: 2-piece folding design Special features: round cast-iron base with a cut-out design that allows for stacking of up to 5 microphone stands Threaded connector: 3/8" Type: black Weight: 3.14 kg

A microphone stand in a two-piece folding design that extends to over 4 m and as such is very suitable for organ and choir recordings. There is an extra safety ring for stability. The extension tube has a 1/2" thread connector. The stand can optionally be combined with boom arm 21231. Base diameter: 1.485 mm EAN: 4016842818310 Height: from 1,850 to 4,400 mm Height adjustment: non-scratching locking screws Leg construction: tube legs with double cross braces Material: steel Rod combination: 3-piece folding design Special features: adjustable up to 4.40 m; additional safety rings included Threaded connector: 1/2" Type: black Weight: 9.94 kg

Sturdy carrying case for 3 microphone stand with round base. Tearproof nylon material, water-resistant. The case comes with padded handles and an adjustable shoulder strap. Plastic rubber feet protect the bottom of the case. 3 separate internal compartments and fixed Velcro strips provide maximum protection for the stands. Dimensions: 1,100 x 320 x 60 mm EAN: 4016842822195 Fastener: zip fastener Handle or carrying type: handle and shoulder straps Material: nylon Special features: 3 internal compartments and fixed Velcro strips provide maximum protection Weight: 1.18 kg

This compact overhead microphone stand is now even lighter and more stable. Thanks to a new leg combination and a new clamping element, its weight has been reduced to 3.6 kg. The leg base diameter of 1 m affords stability and safety. A range of different boom arms can be attached using the 3/8" thread adaptor. The stand extends to a height of over 3 m. Base diameter: 1 mm EAN: 4016842818341 Height: from 1,350 to 3,100 mm Height adjustment: clamping element with locking screw Leg construction: tube legs with cross braces Material: steel Rod combination: 3-piece folding design Special features: for special stage and studio applications; adjustable up to 3.10 m Threaded connector: 3/8" Type: black Weight: 3.786 kg

A world-wide classic. Folding, long-legged die-cast base for stabilty and ease of transport. Noiseless, non-scratching clutch-style height-adjustment mechanism. EAN: 4016842200429 Height: from 900 to 1,605 mm Height adjustment: clutch Leg construction: socket with foldable legs Material: steel Product Category: Topline Rod combination: 2-piece folding design Size when folded: 105 x 85 x 840 mm Special features: zinc die-cast base Threaded connector: 3/8" Type: black Weight: 2.4 kg

A world-wide classic. Folding, long-legged die-cast base for stabilty and ease of transport. Noiseless, non-scratching clutch-style height-adjustment mechanism. Also known as 201/2 EAN: 4016842829521 Height: from 900 to 1,605 mm Height adjustment: clutch Leg construction: socket with foldable legs Material: steel Product Category: Topline Rod combination: 2-piece folding design Size when folded: 105 x 85 x 840 mm Special features: zinc die-cast base Threaded connector: 3/8" Type: chrome Weight: 2.5 kg

Cast-iron round base, with anti-vibration rubber insert for noise filtration. Base diameter: 250 mm EAN: 4016842205493 Height: from 870 to 1,575 mm Height adjustment: clutch Leg construction: flat round cast-iron base Material: steel Product Category: Baseline Rod combination: 2-piece folding design Special features: anti-vibration rubber insert for noise filtration Threaded connector: 3/8" Type: black Weight: 3.58 kg

To secure rod combination in the round base. Diameter: 30 mm EAN: 4016842823253 Height: 5 mm Material: aluminum Special features: to secure rod combination in the round base Suitable for: M20 x 1.25 thread Weight: 0.004 kg