Celestion

Celestion guitar speakers have been an important part of British guitar tone since the birth of Rock & Roll. Traditionally, they're known for lively and vocal midrange character with plenty of sparkle and chime, which turns into an exciting growl when overdriven, often compressing when pushed hard. Inspired by our favourite modern American tones, the A-Type is a different kind of guitar speaker from Celestion. Of course, it still has the musical and revealing three- dimensional quality that is the heart and soul of a Celestion guitar speaker, however it features a more laid-back midrange which reveals body and complexity in the upper register, accompanied by full and rounded low frequencies. The A-Type conveys a fluid, even performance with an increased headroom threshold that allows your amp's tone to shine through. Clean players will love the smooth articulation; for rockers the brooding, powerful low end threatens thunder that's only a heavy riff away! Listen to a sound clip of this speaker here! General Specifications Nominal diameter 12",305mm Power rating 50W Nominal impedance 8 & 16 Ω Sensitivity 98dB Chassis type Pressed steel Voice coil diameter 1.75",44.5mm Voice coil material Round copper Magnet type Ceramic Magnet weight 35oz,0.99kg Frequency range 75-5000Hz Resonance frequency, Fs 75Hz DC resistance, Re 6.2 &12.7 Ω Mounting Information Cut-out diameter 11.1",283mm Diameter 12.2",309mm Magnet structure diameter 5.7", 145mm Mounting slot PCD 11.7",297mm Number of mounting slots 8 Overall depth 5.1",130mm Unit weight 7.7lb,3.5kg

1-inch exit ferrite magnet compression driver. Single piece PETP diaphragm and surround 2,200 Hz recommended min. crossover freq (12dB/oct) General Specifications Power rating 1 12w Continuous power rating 2 24W Nominal impedance 8Ω Sensitivity 3 106dB Frequency range 1500-20,000Hz Recommended min. crossover (12dB/oct) 2,200Hz Voice coil diameter 25mm / 1in Voice coil material Copper clad aluminium Magnet type Ferrite Diaphragm material PETP film Surround material PETP film Mounting Information Width 70mm / 2.8in Depth 50mm/2in Weight 0.7kg / 1.5lb Fitting Bolt (2 x M6 holes on 76mm/3in PCD) Throat exit 25.0mm/1in

CDX1-17 8 Ohm Diaphragm For CDX-1730 & CDX1 - 1745/1746/1770/1730/1731 Compression Driver

2,200Hz recommended min. crossover freq (12dB/oct) Single piece PETP film diaphragm and surround Sound Castle diaphragm assembly Flange (CDX1 - 1730) and screw (CDX1 - 1731 fitting versions available General Specifications Power rating 1 40Wrms Continuous power rating 2 80W Nominal impedance 8Ω Sensitivity 3 110dB Frequency range 1200-20,000Hz Recommended min. crossover (12dB/oct) 2,200Hz Voice coil diameter 44mm/1.75in Voice coil material Edgewound copper clad aluminium Magnet type Neodymium Diaphragm material PETP film Surround material PETP film Mounting Information Maximum width 88.5mm/3.48in Minimum width 82.0mm/3.23in Depth 55mm/2.2in Weight 0.65kg/1.4lb Fitting Flange (4 x M6 holes on 76mm/3in PCD) Throat exit 25.0mm/1in

This classic guitar speaker actually started life as a radio speaker that was modified specifically for use in electric guitar amplifiers. In its original incarnation as the G12 T530 it appeared in several colour variations, but it was the Blue version, fitted as standard into Vox AC30 amps, that secured its place in guitar tone history.The Blue found favour with notable guitarists like Brian May, due to its glorious dampened attack, warm lows, mellow upper-mids and brilliant bell-like top-end. When coupled with a suitable amplifier it evokes rich definition and develops beautiful musical compression when pushed. According to tone enthusiasts worldwide, the Blue is the benchmark for guitar speaker perfection. Listen to a sound clip of this speaker here! General Specifications Nominal diameter 12", 305mm Power rating 15Wrms Nominal impedance Available 8 or 15 Ω Sensitivity 100dB Chassis type Pressed steel Voice coil diameter 1.75", 44.5mm Voice coil material Round copper Magnet type Alnico Frequency range 75-5000Hz Resonance frequency, Fs 75Hz DC resistance, Re Available 6.4 or 11.8 Ω Mounting Information Cut-out diameter 11.1", 283mm Diameter 12.2", 309mm Magnet structure diameter 5.0", 128mm Mounting slot dimensions 0.31", 7.9mm Mounting slot PCD 11.7", 297mm Number of mounting slots 4 Overall depth 6.5", 165mm Unit weight 9.3lb, 4.2kg

With a 90-watt power rating, the Celestion Cream is purpose-built for vintage tones, whatever kind of amp you use. By applying new technologies and manufacturing methods developed during the creation of our Creamback speakers, we've been able to deliver a higher power rating while preserving the very essence of an alnico guitar speaker. Delivering a glorious, laid-back attack, the Cream exudes warm lows and a brilliant bell-like chime. It has smooth and organic mids, further characterised by a fine-grained detail that adds a high-definition quality to the vocal range. The Cream has been specially created to bring alnico class to all kinds of amps from 1-watt to 90-watts. It conveys a satisfying warmth, detailed expressiveness and exceptional musicality, even at low power levels. Listen to a sound clip of this speaker here! General Specifications Nominal diameter 12", 305mm Power rating 90W Nominal impedance 8 & 16 Ω Sensitivity 100dB Chassis type Pressed steel Voice coil diameter 1.75", 44.5mm Voice coil material Round copper Magnet type Alnico Frequency range 75-5000Hz Resonance frequency, Fs 75Hz DC resistance, Re 6.7 & 13.1 Ω Mounting Information Cut-out diameter 11.1, 283mm Diameter 12.2", 309mm Magnet structure diameter 5.0", 128mm Mounting slot dimensions 0.31", 7.9mm Mounting slot PCD 11.7", 297mm Number of mounting slots 8 Overall depth 6.5, 165mm Unit weight 9.3lb, 4.2kg

Building on the platform of the Blue, the Gold is a higher-powered, Alnico-magnet guitar speaker that recreates the unmistakable sonic signature of a 'well played-in' original. Over time, the high frequencies of a Blue soften and become less chalky as the cone becomes more flexible - a much sought after characteristic that the Gold exhibits straight out of the box. Also present in the Gold sound from the outset is an added warmth and complexity in the midrange which, coupled with the classic Alnico qualities of a laid-back attack, rounded low end and brilliant bell-like highs, deliver huge rhythm voicings and saturated vocal lead tones.The Gold is a wonderfully expressive and revealing loudspeaker, affording guitarists an unprecedented degree of dynamic control. It has already become a favourite for many working players worldwide whether picking and bending with Brad Paisley, or rocking hard with Danny Spitz of Anthrax. Listen to a sound clip of this speaker here! General Specifications Nominal diameter 12", 305mm Power rating 50Wrms Nominal impedance Available 8 or 15 Ω Sensitivity 100dB Chassis type Pressed steel Voice coil diameter 1.75", 44.5mm Voice coil material Round copper Magnet type Alnico Frequency range 75-5000Hz Resonance frequency, Fs 75Hz DC resistance, Re 6.4 or 11.8 Ω Mounting Information Cut-out diameter 11.1", 283mm Diameter 12.2", 309mm Magnet structure diameter 5.0", 128mm Mounting slot dimensions 0.31", 7.9mm Mounting slot PCD 11.7", 297mm Number of mounting slots 4 Overall depth 6.5", 165mm Unit weight 9.3lb, 4.2kg

Developed in the late '70s, the Classic Lead guitar speaker uses a fiberglass voice coil former to deliver an 80W power rating and a unique dynamic sound. A firm favorite with lead guitarists, the Classic Lead features a tightly controlled low-end, with strong high bass / low mid punch, aggressive mid range attack and a powerful yet controlled top-end.For power chords it has the tone to make its presence felt but the subtle high-frequency roll- off makes it ideal for solos, able to project single notes on loud stages without becoming shrill. Listen to a sound clip of this speaker here! General Specifications Nominal diameter 12", 305mm Power rating 80Wrms Nominal impedance Available 8 or 16 Sensitivity 99dB Chassis type Pressed steel Voice coil diameter 1.75", 55.5mm Voice coil material Round copper Magnet type Ceramic Magnet weight 50oz, 1.42kg Frequency range 80-5000Hz Resonance frequency, Fs 85Hz DC resistance, Re 6.9 Mounting Information Cut-out diameter 11.1", 283mm Diameter 12.2", 309mm Magnet structure diameter 6.1", 156mm Mounting slot dimensions 0.31", 7.9mm Mounting slot PCD 11.7", 297mm Number of mounting slots 4 Overall depth 5.3", 135mm Unit weight 10.4lb, 4.7kg

The Eight 15 is ideal for upgrading your bedroom blaster with authentic British tone. Well-balanced mids and highs complement a surprisingly meaty bottom end - it's just about the biggest sounding 8 inch loudspeaker we've ever heard! The Eight 15 speaker is available in 4 making it ready, willing and able to blast new life into junior combos like the Fender Champ, bringing extra depth, girth and punch to your tone. Supersize the performance of your amp with the sonic might of the Eight 15, the fattest sounding 8-inch speaker around. General Specifications Nominal diameter 8", 203mm Power rating 20Wrms Nominal impedance 4, 8 & 16 Ω Sensitivity 95dB Chassis type Pressed steel Voice coil diameter 1", 25mm Voice coil material Round copper Magnet type Ceramic Magnet weight 13oz, 0.37kg Frequency range 100-5000Hz Resonance frequency, Fs 120Hz DC resistance, Re 6.55 Ω Mounting Information Cut-out diameter 7.2", 183mm Diameter 8.1", 205mm Magnet structure diameter 3.3", 85mm Mounting slot dimensions 0.19x0.31", 5x8mm Mounting slot PCD 7.7", 195mm Number of mounting slots 4 Overall depth 3.3", 82.6mm Unit weight 2.2lb, 1kg

Finally, a dedicated guitar speaker for amp modellers and IRs. The F12-X200 is a truly full range driver that delivers a frequency response from 60Hz all the way up to 20kHz, the higher frequency part of the signal is reproduced using a Celestion compression driver which has been integrated using a high quality crossover circuit. This enables the F12-X200 to reproduce the full spectrum of audible frequencies, for the most accurate output possible, whatever your environment and set-up. The F12-X200's response is remarkably neutral, with Celestion technology built in to ensure there are no unwanted colourations that can overpower the input signal. However, the lighter moving mass and straighter sided cone of the type commonly used with guitar speakers gives the X200 the feel and live response of a traditional guitar speaker, delivering all the physical feedback you'd expect from playing through a conventional guitar rig. Used with amp modelers or IRs, in a backline cab or a wedge monitor, on stage or in the studio, it doesn't just sound like great guitar tone, it feels like it too. Download a DIY Cabinet Design Here We can cut these for you, contact us HERE to find out more. General Specifications Nominal diameter 12" Power rating 200W Nominal impedance 8Ω Sensitivity 97dB Chassis type Pressed steel Voice coil diameter 2" Voice coil material Round copper Magnet type Ceramic Frequency range 60 - 20,000Hz Resonance frequency, Fs 75Hz Mounting Information Cut-out diameter 11.1", 283mm Diameter 12.2", 309mm Magnet structure diameter 6.7", 170mm Mounting slot PCD 11.7", 297mm Number of mounting slots 8 Overall depth 6.5", 165mm Unit weight 9.1lb, 4.1kg

The F12M-150 is a full range, LIVE response speaker, purpose designed for use with amp modellers and IRs. Its unique design features two additional tweeter cones integrated into the main woofer cone (making it “Triple Cone”). This enables the speaker to deliver near full-range frequency performance: from 60Hz up to 12kHz, for a rich and detailed sound, whatever your set-up. Designed with Celestion’s Pro Audio know-how, response is flat and neutral, ensuring no unwanted colourations that could overwhelm the input signal. But with an optimised woofer cone and lighter moving mass the F12M-150 is designed to closely mimic the responsiveness of a traditional guitar speaker, delivering all the tactile feel you would expect from playing through a conventional guitar rig. General Specifications Nominal diameter 12", 305mm Power rating 150Wrms Nominal impedance 8Ω Sensitivity 97dB Chassis type Pressed steel Voice coil diameter 2in, 50mm Voice coil material Round copper Magnet type Ceramic Magnet weight 35oz, 0.99kg Frequency range 60-12000Hz Resonance frequency, Fs 60Hz Mounting Information Cut-out diameter 11.1", 283mm Diameter 12.2", 309mm Magnet structure diameter 5.7", 145mm Mounting slot dimensions 0.31in, 7.9mm Mounting slot PCD 11.7in, 297mm Number of mounting slots 8 Overall depth 5.1", 130mm Unit weight 7.9lb, 3.6kg

The new G10 Creamback packs everything guitar players love about Creamback speakers into a 10-inch format. Hand-built in the UK using the same production methods and materials developed for the 12-inch models, the G10 Creamback uses a ceramic magnet and a 1.75-inch voice coil to deliver 45-watt power handling. With all the punch and dynamics typical of a 10, its overall tone is warm, expressive, detailed and well-balanced. General Specifications Nominal diameter 10", 254mm Power rating 45W Nominal impedance Available 8Ω or 16Ω Sensitivity 96dB Chassis type Pressed steel Voice coil diameter 1.75", 44.5mm Voice coil material Round copper Magnet type Ceramic Magnet weight 20oz Frequency range 95-5500Hz Resonance frequency, Fs 98Hz DC resistance, Re Available 6.4Ω or 12.05Ω Mounting Information Cut-out diameter 9.0", 229mm Diameter 10.0", 254m Magnet structure diameter 4.9", 124mm Mounting slot PCD 9.6", 245mm Number of mounting slots 8 Overall depth 4.0", 102mm Unit weight 3.5lb, 1.6kg

Following the great reviews we received for the Gold 12", we realised there was also a need for a speaker that conveyed the Alnico mellowness of the original Blue, with the speed and response of a 10" driver.The G10 Gold is the ultimate 10" guitar speaker, blending unmistakable Alnico class with a rich low-end, creamy mid-range and vintage chiming top-end. Springy, warm, revealing and highly expressive, it can be used singly or in pairs to add a classy sheen to any amp, or in a 4x10 configuration for higher volume depth, warmth and shimmer, with less of the boom associated with 4x12 cabinets. Listen to a sound clip of this speaker here! General Specifications Nominal diameter 10", 254mm Power rating 40Wrms Nominal impedance 8 or 16 Ω Sensitivity 98dB Chassis type Pressed steel Voice coil diameter 1.75", 44.5mm Voice coil material Round copper Magnet type Alnico Frequency range 80-6000Hz Resonance frequency, Fs 80Hz DC resistance, Re 6.66 or 13.56 Ω Mounting Information Cut-out diameter 9.0", 229mm Diameter 10.1", 256mm Magnet structure diameter 4.7", 119mm Mounting slot PCD 9.6", 244mm Mounting slot dimensions 0.25", 6.5mm Number of mounting slots 8 Overall depth 5.3", 135mm Unit weight 6.0lb, 2.7kg

The 10" that thinks it's a 12". This guitar speaker was developed to recapture the legendary sound of Celestion's 1970s 10s - a 10" speaker with a surprisingly meaty tone.Low in output but with the weighty low-end balance of a 12", the G10 Greenback features a complex, creamy mid-range and smooth, vintage top-end.In small combos this speaker adds real class, and when combined in a 4x10 gives rise to a raunchy, full-bodied tone, rich in low-end thump. General Specifications Nominal diameter 10", 254mm Power rating 30Wrms Nominal impedance Available 8Ω or 16Ω Sensitivity 95dB Chassis type Pressed steel Voice coil diameter 1.75", 44.5mm Voice coil material Round copper Magnet type Ceramic Magnet weight 14 oz Frequency range 95-5500Hz Resonance frequency, Fs 98Hz DC resistance, Re Available 6.4Ω or 12.05Ω Mounting Information Cut-out diameter 9.0", 229mm Diameter 10.0", 254mm Magnet structure diameter 4.9", 124mm Mounting slot dimensions 0.25 x 0.43", 6.5 x 11mm Ø Mounting slot PCD 9.6", 245mm Number of mounting slots 8 Overall depth 4.0", 102mm Unit weight 3.5lb, 1.6kg

A worthy successor to the Vintage 10, the G10 Vintage is a 10" speaker with bags of attitude. Using powerful ceramic magnets and the same voice coil design as the Vintage 30, the G10 packs an impressive punch with its 60W power handling.With the fast response of a 10" but with the strong and creamy vocal tones of a 12", the G10 is the ideal choice to add depth to hollow- sounding amps, or for players who want to get humbucker-type girth from single-coils. Can be used singly to add vocal warmth to small valve combos, or in quartets for a weightier but still lively attack. Listen to a sound clip of this speaker here! General Specifications Nominal diameter 10", 254mm Power rating 60Wrms Nominal impedance Available 8Ω or 16Ω Sensitivity 97dB Chassis type Pressed steel Voice coil diameter 1.75", 44.5mm Voice coil material Roundcopper Magnet type Ceramic Magnet weight 31oz, 0.88kg Frequency range 100-5500Hz Resonance frequency, Fs 115Hz DC resistance, Re Available 7.47 or 12.33 Mounting Information Cut-out diameter 9.0", 229mm Diameter 10.1", 256mm Magnet structure diameter 5.3", 134mm Mounting slot dimensions 0.2 x 0.3", 6 x 8mm Mounting slot PCD 9.6", 245mm Number of mounting slots 4 Overall depth 4.1", 104mm Unit weight 5.3lb, 2.4kg

Throughout his career, whether in the studio or on the stage, the Celestion 20-watt 'Greenback' has played an essential role to Edward Van Halen in making the tones that rewrote the book on guitar sound. When it came time to select speakers for his new EVH Brand 5150-III signature amp, there was only one choice - Celestion.The Heritage Series G12M guitar speaker faithfully reproduces the sonic qualities of the original '60s version Greenback used to make EVH tone from day one. With the addition of a black rear can featuring the EVH logo and his unmistakable red, white and black stripes, the G12EVH was born. Unmistakable look, but more importantly unmistakable tone. General Specifications Nominal diameter 12", 305mm Power rating 20Wrms Nominal impedance 8Ω or 15Ω Sensitivity 96dB Chassis type Pressed steel Voice coil diameter 1.75", 44.5mm Voice coil material Roundcopper Magnet type Ceramic Magnet weight 35oz, 0.99kg Frequency range 75-5000Hz Resonance frequency, Fs 75Hz DC resistance, Re 6.57Ω & 12.13Ω Mounting Information Cut-out diameter 11.1", 283mm Diameter 12.2", 309mm Magnet structure diameter 5.9", 150mm Mounting slot PCD 11.7", 297mm Number of mounting slots 4 Overall depth 5 .1", 130mm Unit weight 7.9lb, 3.6kg

The G12H-150 Redback has been created for players who are looking for extreme power handling but refuse to compromise on great tone. Rated at a gargantuan 150-watts, the Redback is constructed with a supersized 2-inch voice coil and features the heaviest G12 magnet. The result is a guitar speaker that sounds 100% Celestion in character, yet is primed to withstand a pummelling from a 100-watt head all by itself, and still come back for more.The Redback proves that you no longer need to choose between power and tone. With a tight, well-controlled low end, detailed midrange and more relaxed treble, Celestion's engineering expertise has produced a truly high power guitar speaker that can still deliver balance, responsiveness and superb playability, with muscular ease.With lower power combos, expect tons of smooth, clean tone and don't be afraid to plug in your favourite stomp box. Thinking of downsizing your cabinet? Simply hook up a single Redback to your 100-watt head and generate giant slabs of frightening, monstrous tone. Listen to a sound clip of this speaker here! General Specifications Nominal diameter 12", 305mm Power rating 150W Nominal impedance Available 8Ω or 16Ω Sensitivity 100dB Chassis type Pressed steel Voice coil diameter 2", 50mm Voice coil material Round copper Magnet type Ceramic Magnet weight 50oz, 1.42kg Frequency range 70-5000Hz Resonance frequency, Fs 75Hz Mounting Information Cut-out diameter 11.1", 283mm Diameter 12.2", 309mm Magnet structure diameter 6.6", 168mm Mounting slot dimensions 0.31",7.9mm Mounting slot PCD 11.7", 297mm Number of mounting slots 8 Overall depth 5.4", 138mm Unit weight 10.4lb, 4.7kg

Originally re-released a little over a decade ago, the G12H guitar speaker remains hugely popular with players looking to recreate the classic sounds of 60s and 70s rock.With a strong, aggressive low-end and powerful low-mids, the G12H penetrates any mix with an attacking upper mid-range and an ice-cool top- end. Used singly or in quartets it provides serious attitude to soft amp tones, easily cutting through loud stage levels for chord work, and imparting a hard edge to single notes.A favourite in the 'boutique' amplifier market, the G12H guitar speaker is often used on its own or paired with a Celestion Blue or Gold for a full-bodied sound that adds ceramic attitude to the chime of an Alnico speaker. Listen to a sound clip of this speaker here! General Specifications Nominal diameter 12", 305mm Power rating 30Wrms Nominal impedance Available 8Ω or 16Ω Sensitivity 100dB Chassis type Pressed steel Voice coil diameter 1.75", 44.5mm Voice coil material Round copper Magnet type Ceramic Magnet weight 50oz, 1.42kg Frequency range 75-5000Hz Resonance frequency, Fs 85Hz DC resistance, Re 6.7Ω and 13.1Ω Mounting Information Cut-out diameter 11.1", 283mm Diameter 12.2", 309mm Magnet structure diameter 6.1", 156mm Mounting slot dimensions 0.31",7.9mm Mounting slot PCD 11.7", 297mm Number of mounting slots 4 Overall depth 5.3", 135mm Unit weight 10.4lb, 4.7kg

Back in the late 60s the G12H was created by fixing an ‘H’ type (heavy) magnet to the body of a G12M guitar speaker. Result: a speaker with more power and a different tonal balance: firmer bass and a more pronounced top end. So we added an ‘H’ magnet to the G12M-65 Creamback to create a guitar speaker that delivers the sonic signature of a G12H combined with Creamback levels of power handling. The result is the G12H-75 Creamback. It delivers 75-watts of power handling with ease and has unmistakeable G12H tone with a tighter low end than the G12M-65 Creamback and a punchier more dynamic high end. The H magnet brings additional focus body and girth to the Creamback tone. It thickens single notes resulting in a highly articulate vocal character. These additional characteristics mean that the G12H-75 Creamback offers exceptional performance when used for lead guitar and sounds massive loaded into a 4×12 cab! General Specifications Nominal diameter 12", 305mm Power rating 75Wrms Nominal impedance 8Ω & 16Ω Sensitivity 100dB Chassis type Pressed steel Voice coil diameter 1.75", 44.5mm Voice coil material Round copper Magnet type Ceramic Magnet weight 50oz, 1.42kg Frequency range 70-5000Hz Resonance frequency, Fs 75Hz DC resistance, Re 6.77Ω & 12.5Ω Mounting Information Cut-out diameter 11.1", 283mm Diameter 12.2", 309mm Magnet structure diameter 6.6", 168mm Mounting slot dimensions Ø 0.31in/7.9mm Mounting slot PCD 11.7", 297mm Number of mounting slots 8 Overall depth 5.4in/138mm Unit weight 10.4lb/4.7kg

Celestion's very own monster of rock, the G12K- 100, makes full use of the heaviest G12 magnet to combine huge power handling with superb clarity across a wide frequency response.A massive bottom-end, rock-hard mid-range and restrained top-end make this the perfect guitar speaker to add thump and grind to modern high-gain tones.Loaded in 4x12s it delivers its famous sledgehammer lows, but it also often finds use in small boutique combos, bringing a powerful mix of low-end warmth and mid-range attack. Listen to a sound clip of this speaker here! General Specifications Nominal diameter 12", 305mm Power rating 100W Nominal impedance Available 8Ω Sensitivity 99dB Chassis type Pressed steel Voice coil diameter 1.75", 44.5mm Voice coil material Round copper Magnet type Ceramic Magnet weight 50oz, 1.42kg Frequency range 80-5500Hz Resonance frequency, Fs 85Hz DC resistance, Re 7 Ω Mounting Information Cut-out diameter 11.1", 283mm Diameter 12.2", 309mm Magnet structure diameter 6.1", 156mm Mounting slot dimensions 0.31",7.9mm Mounting slot PCD 11.7", 297mm Number of mounting slots 4 Overall depth 5.3", 135mm Unit weight 10.4lb, 4.7kg

The G12M Greenback has evolved over the decades but still retains its essential, sought- after tone.Angus Young has been a Greenback devotee since the early days of AC/DC. This model is voiced with additional broad mid-range attack and restrained top-end to give a forward, punchy attitude to chords and a searing lead tone without fizz. With its well-controlled low end it can be used singly in low-powered amps, or in multiples for high-power rock heads. It's an ideal guitar speaker to bring drive and definition to modern high gain amps. General Specifications Nominal diameter 12", 305mm Power rating 25Wrms Nominal impedance Available 8Ω or 16Ω Sensitivity 98dB Chassis type Pressed steel Voice coil diameter 1.75", 44.5mm Voice coil material Round copper Magnet type Ceramic Magnet weight 35oz, 0.99kg Frequency range 75-5000Hz Resonance frequency, Fs 75Hz DC resistance, Re Available 6.7Ω or 13.1Ω Mounting Information Cut-out diameter 11.1", 283mm Diameter 12.2", 309mm Magnet structure diameter 5.9", 150mm Mounting slot dimensions 0.31", 7.9mm Ø Mounting slot PCD 11.7", 297mm Number of mounting slots 4 Overall depth 5.1", 130mm Unit weight 7.9lb, 3.6kg

Combining a hemp cone specifically chosen for its tonal character and a medium-weight (35oz) ceramic magnet, the G12M-50 Hempback takes Celestion tone in an exciting new direction. Well defined and powerful, the Hempback delivers a thump in the low end, a finely balanced midrange (with just a little Celestion crunch thrown in) and smooth, singing highs. It all adds up to a speaker that’s perfect for deploying with brighter sounding amps, where a more laid back feel is required. Load up a Hempback for a smooth and “smoky” sound that’s musical and responsive, and let your hemp tone shine through. General Specifications Nominal diameter 12", 305mm Power rating 50Wrms Nominal impedance 8Ω & 16Ω Sensitivity 99dB Chassis type Pressed steel Voice coil diameter 1.75",44.5mm Voice coil material Round copper Magnet type Ceramic Magnet weight 35oz, 0.99kg Frequency range 75-5000Hz Mounting Information Cut-out diameter 11.1", 283mm Diameter 12.2", 309mm Magnet structure diameter 5.9", 150mm Mounting slot PCD 11.7in, 297mm Number of mounting slots 8 Unit weight 7.9lb, 3.6kg

The G12M Greenback is perhaps the definitive vintage Celestion ceramic magnet guitar speaker. Developed in the mid-sixties, it was quickly adopted by players like Hendrix, Clapton, Beck and Page, who typified the louder and more aggressive blues rock playing styles that came to characterize that era.The G12M-65 Creamback produces the familiar woody G12M tone, but handles greater power making it ideally suited for today's amps, when a vintage tone is desired. The increased power handling brings with it low end grunt complementing the warm and vocal mid range, crunchy upper- mids and sweet, refined highs. General Specifications Nominal diameter 12", 305mm Power rating 65Wrms Nominal impedance 8Ω & 16Ω Sensitivity 97dB Chassis type Pressed steel Voice coil diameter 1.75", 44.5mm Voice coil material Round copper Magnet type Ceramic Magnet weight 35oz, 0.99kg Frequency range 75-5000Hz Resonance frequency, Fs 75Hz DC resistance, Re 6.7Ω & 13.1Ω Mounting Information Cut-out diameter 11.1", 283mm Diameter 12.2", 309mm Magnet structure diameter 5.9", 150mm Mounting slot PCD 11.7", 297mm Number of mounting slots 8 Overall depth 5.1", 130mm Unit weight 7.9lb, 3.6kg

With a massive 100W power rating, this speaker sits perfectly in high-power or hybrid amplifiers. The G12T Hot 100 voices a modern sound with a big bass presence. General Specifications Nominal diameter 12", 305mm Power rating 100Wrms Nominal impedance Available 4Ω, 8Ω or 16Ω Sensitivity 97dB Chassis type Pressed steel Voice coil diameter 2", 50.8mm Voice coil material Round copper Magnet type Ceramic Magnet weight 35oz, 0.99kg Frequency range 80-5000Hz Resonance frequency, Fs 86Hz DC resistance, Re Available 3.4Ω, 7.4Ω or 14.83Ω Mounting Information Cut-out diameter 11.1", 283mm Diameter 12.2", 309mm Magnet structure diameter 5.8", 148mm Mounting slot dimensions 0.31",7.9mm Mounting slot PCD 11.7", 297mm Number of mounting slots 4 Overall depth 4.9", 124mm Unit weight 7.1lb, 3.2kg

Featured in the world's top selling 4x12 cabinet, the G12T-75 guitar speaker is a high powered rock player's dream.Built to meet the demands of high gain amplifiers, the G12T-75 combines a huge, tightly controlled low-end and aggressive mid-range with a softened top-end that adds a welcome sweetness to overdrive, distortion and aggressive upper harmonics. These are the characteristics that make the G12T-75 the weapon of choice for Yngwie Malmsteen. Listen to a sound clip of this speaker here! General Specifications Nominal diameter 12", 305mm Power rating 75W Nominal impedance Available 8Ω or 16Ω Sensitivity 97B Chassis type Pressed steel Voice coil diameter 1.75", 44.5mm Voice coil material Round copper Magnet type Ceramic Magnet weight 35oz, 0.99kg Frequency range 80-5000Hz Resonance frequency, Fs 85Hz DC resistance, Re Available 6.77Ω or 12.9Ω Mounting Information Cut-out diameter 11.1", 283mm Diameter 12.2", 309mm Magnet structure diameter 5.7", 145mm Mounting slot dimensions 0.31",7.9mm Mounting slot PCD 11.7", 297mm Number of mounting slots 4 Overall depth 5.0", 127mm Unit weight 7.7lb, 3.5kg

With a larger cone delivering an extended low end response, the 100-watt Fullback has a big, deep voice, delivering smooth and expressive tones seemingly without effort. While retaining our classic, harmonically complex and finely detailed mid-range, the larger 15" cone of the Fullback shifts this characteristic down a register. Clean sounds are warm and expressive, revealing and enhancing the qualities of your amp and guitar without unnecessary colouration. Overdrive sounds are complex and musical; push harder for a weighty, contralto growl, with a softer, warmer mid-range. Incorporating an eight hole chassis, the Fullback is the ideal choice whether you're looking for the perfect upgrade for your 15" combo, or you're looking for an interesting tonal alternative to a 12" guitar speaker. General Specifications Nominal diameter 15", 381mm Power rating 100W Nominal impedance Available 8Ω or 16Ω Sensitivity 99dB Chassis type Pressed steel Voice coil diameter 2", 50mm Voice coil material Round copper Magnet type Ceramic Frequency range 65-4000Hz Resonance frequency, Fs 85Hz DC resistance, Re 6.4Ω Mounting Information: Cut-out diameter 13.8", 351mm Diameter 15.2", 385mm Magnet structure diameter 6.1", 156mm Mounting slot dimensions 0.36"x0.24", 9.2mmx7.9mm Mounting slot PCD 14.6", 369mm Number of mounting slots 8 Overall depth 6.0", 152.9mm Unit weight 10.6lb, 4.8kg

Compatible for use with bolt (flange) fitted compression drivers Features embedded elastomer side panels that make it acoustically inert. Specifications: Horn Type Expodential Horn Material Cast Aluminium Driver Mounting Detail 2 M6 holes on 76mm PCD Width 180mm Height 180mm Depth 90mm Throat Exit 25.1mm Weight 0.7kg Radiation Pattern 70° x 50°

Originally created in the late 70s using more modern materials and techniques for a higher power handling, the G12-65 is widely regarded as one of the best guitar speakers ever produced for use in a 4x12 cabinet. With its fast attack and tightly controlled low end, the G12-65 had become a firm favourite with hard rock players by the early 80s. The precisely tuned mid-range and crisp defined top-end contribute to an aggressive crunch sound that punches through the mix while the mid-range warmth and detail give weight and depth to single notes. Listen to a sound clip of this speaker here! General Specifications Nominal diameter 12", 305mm Power rating 65W Nominal impedance Available 8Ω or 15Ω Sensitivity 97dB Chassis type Pressed steel Voice coil diameter 1.75", 44.5mm Voice coil material Round copper Magnet type Ceramic Magnet weight 35oz, 0.99kg Frequency range 80-5000Hz Resonance frequency, Fs 85Hz DC resistance, Re Available 6.9Ω or 11.8Ω Mounting Information: Cut-out diameter 11.1", 283mm Diameter 12.2", 309mm Magnet structure diameter 5.7", 145mm Mounting slot dimensions 0.31",7.9mm Mounting slot PCD 11.7", 297mm Number of mounting slots 4 Overall depth 5.0", 128mm Unit weight 7.7lb, 3.5kg

The Midnight 60 continues Celestion’s tradition of delivering rich, classic British tone in innovative new ways, featuring the moving parts that were inspired by the V-Type design, but with a different magnet assembly which changes the overall tonal balance to give a sonic character more reminiscent of Celestion’s vintage G12L speaker. Whatever the genre, Midnight 60 provides an exhilarating sound in the classic Celestion style. Cleans are well-balanced with just enough top end to make the high frequencies sparkle. Overdriven this speaker brings searing rock tones, with plenty of low-end warmth and mid-band character. General Specifications Nominal diameter 12", 305mm Power rating 60Wrms Nominal impedance 8Ω & 16Ω Sensitivity 96dB Chassis type Pressed steel Voice coil diameter 1.75",44.5mm Voice coil material Round copper Magnet type Ceramic Magnet Weight 20oz, 0.6kg Frequency range 75-5000Hz Resonance frequency, Fs 75Hz DC resistance, Re 6.82Ω, 13.12Ω Mounting Information Cut-out diameter 11.1", 283mm Diameter 12.2", 309mm Magnet structure diameter 4.5", 115mm Mounting slot PCD 11.7in, 297mm Mounting slot dimensions 0.31", 7.9mm Number of mounting slots 8 Overall depth 4.7", 120mm Unit weight 5.5lb, 2.5kg

The Neo Creamback is every ounce a Classic Celestion, delivering all the magical tone you'd get from a traditional Creamback. The difference is, it's built with a neodymium magnet: making this speaker around half the weight of a traditional ceramic magnet speaker. Celestion's engineers have developed a new and innovative way to better harness the mighty forces of the neodymium magnet, enabling us to create a guitar speaker that can deliver authentic Creamback tone with ease, while preserving the benefit of neodymium's much lighter weight. You still get the low end punch, warm, vocal midrange and sweet refined highs the Creamback is famous for: push it hard and enjoy the "race-car growl" that sets pulses racing. But pick up a cab that's loaded with Neo Creambacks and you'll see what makes this speaker truly different. Listen to a sound clip of this speaker here! General Specifications Nominal diameter 12", 305mm Power rating 60W Nominal impedance 8Ω & 16Ω Sensitivity 97dB Chassis type Pressed steel Voice coil diameter 1.75", 44.5mm Magnet type Neodymium Frequency range 75-5000Hz Resonance frequency, Fs 75Hz DC resistance, Re 6.6Ω & 13.1Ω Voice coil former material Round copper Mounting Information Cut-out diameter 11.1", 283mm Diameter 12.2", 309mm Magnet structure diameter 4.9", 124mm Mounting slot dimensions 4.9", 124mm Mounting slot dimensions 0.31", 7.9mm Mounting slot PCD 11.7", 297mm Number of mounting slots 8 Overall depth 4.8", 121.5mm Unit weight 4.2lb, 1.9kg

Featuring a unique neodymium magnet assembly that provides pure Celestion tonality, the Neo V-Type delivers the familiar and addictive modern vintage sound of the V-Type, but with a weight reduction of almost 50%. This sweet sounding speaker has a superbly balanced sonic signature that imparts a vintage musicality to your tone. Clean sounds have just the right amount of upper-mid chime and HF sparkle to add clarity and definition. Crank it up for a sizzling overdrive and some raw rhythmic grind, but expect a little extra definition and note separation for your searing, single note lead lines thanks to some neodymium magnet magic. General Specifications Nominal diameter 12", 305mm Power rating 70Wrms Nominal impedance 8Ω & 16Ω Sensitivity 98dB Chassis type Pressed steel Voice coil diameter 1.75",44.5mm Voice coil material Round copper Magnet type Neodymium Frequency range 75-5000Hz Resonance frequency, Fs 75Hz Mounting Information Cut-out diameter 11.1", 283mm Diameter 12.2", 309mm Magnet structure diameter 4.9", 124mm Mounting slot PCD 11.7in, 297mm Mounting slot dimensions 0.31", 7.9mm Number of mounting slots 8 Overall depth 4.8", 122mm Unit weight 4.2lb, 1.9kg

Sacrificing none of the delicious musicality of your favourite Celestions, the Neo 250 Copperback is a neodymium speaker that supplies tons of tone without the signature cone break-up immediately associated with the classic Celestion growl. It's definitely not the "brown sound", but for those wanting more transparency and less midrange vocal intensity the Neo 250 reveals the best from your amplifier and playing without additional colouration. The speaker's unique response has a tight low end, neutral low mids, a clear, open upper-mid definition and well-controlled high treble, meaning you can shift from shimmering tubular-bell-like cleans to "flute-like" high gain with simply a tweak of the drive knob. Rated at a monstrous 250-watts, the Neo 250 works together with your amp to provide unparalleled dynamics, delivering all the headroom and touch sensitivity you could possibly need. And built with a neodymium magnet, you get all this power and tone weighing in at a modest 5.5lb (2.6kg). Listen to a sound clip of this speaker here! General Specifications Nominal diameter 12", 305mm Power rating 250W Nominal impedance 8Ω Sensitivity 100dB Chassis type Pressed steel Voice coil diameter 2", 50mm Voice coil material Round copper Magnet type Neodymium Frequency range 70-5500Hz Resonance frequency, Fs 55Hz Mounting Information Cut-out diameter 11.1", 283mm Diameter 12.2", 309mm Magnet structure diameter 4.9", 125mm Mounting slot dimensions 0.31",7.9mm Mounting slot PCD 11.7", 297mm Number of mounting slots 8 Overall depth 5", 127mm Unit weight 5.5lb, 2.6kg

PULSE XL is a new range of bass guitar speakers engineered with a deep reaching frequency response for a full and round low-end. Punchy and responsive they’re sophisticated enough to articulate the smoother sounds, but versatile enough to bring a bold- faced swagger for the times when you need to stand up, dial it up and roar. PULSE XL speakers feature long voice coils for a deeper bass sound and greater clarity, wound with round copper for just the right amount of treble, formed on heat retardant polyimide for all the power handling you could possibly need. Hard-felt dustcaps smooth out excessive cone distortion, so the low end stays deep and warm and the treble is always clean and precise. Each speaker features a multi-roll surround, which allows for plenty of cone excursion (throw) and gives a satisfying growl when you dig in and play loud. General Specifications Nominal diameter 10", 254mm Power rating 400W Nominal impedance 8Ω Sensitivity 92dB Chassis type Pressed steel Voice coil diameter 2" / 50mm Voice coil material Round copper Magnet type Ferrite Magnet Weight 0.88Kg Former Material Polyimide Surround Cloth-sealed, Triple roll Frequency range 40-2,200Hz Mounting Information Cut-out diameter 9.18" / 233.2mm Diameter 10.8" / 256mm Gasket Front & Rear Mount Mounting slot dimensions 0.25" / 6.4mm Mounting slot PCD 9.66" / 245.4mm Number of mounting slots 8 Overall depth 4.25" / 245.4mm Unit weight 8.8lb / 4kg

PULSE XL is a new range of bass guitar speakers engineered with a deep reaching frequency response for a full and round low-end. Punchy and responsive they’re sophisticated enough to articulate the smoother sounds, but versatile enough to bring a bold- faced swagger for the times when you need to stand up, dial it up and roar. PULSE XL speakers feature long voice coils for a deeper bass sound and greater clarity, wound with round copper for just the right amount of treble, formed on heat retardant polyimide for all the power handling you could possibly need. Hard-felt dustcaps smooth out excessive cone distortion, so the low end stays deep and warm and the treble is always clean and precise. Each speaker features a multi-roll surround, which allows for plenty of cone excursion (throw) and gives a satisfying growl when you dig in and play loud. General Specifications Nominal diameter 12" / 305mmmm Power rating 500W Nominal impedance 8Ω Sensitivity 94dB Chassis type Pressed steel Voice coil diameter 2" / 50mm Voice coil material Round copper Magnet type Ferrite Magnet Weight 0.94Kg Former Material Polyimide Surround Cloth-sealed, Triple roll Frequency range 35 - 2200Hz Mounting Information Cut-out diameter 11.08" / 281.4mm Diameter 12.26" / 311.4mm Gasket Front & Rear Mount Mounting slot dimensions 0.25" / 6.4mm Mounting slot PCD 11.7" / 297.5mm Number of mounting slots 8 Overall depth 5.3" / 135mm Unit weight 9lb / 4.1Kg

PULSE XL is a new range of bass guitar speakers engineered with a deep reaching frequency response for a full and round low-end. Punchy and responsive they’re sophisticated enough to articulate the smoother sounds, but versatile enough to bring a bold- faced swagger for the times when you need to stand up, dial it up and roar. PULSE XL speakers feature long voice coils for a deeper bass sound and greater clarity, wound with round copper for just the right amount of treble, formed on heat retardant polyimide for all the power handling you could possibly need. Hard-felt dustcaps smooth out excessive cone distortion, so the low end stays deep and warm and the treble is always clean and precise. Each speaker features a multi-roll surround, which allows for plenty of cone excursion (throw) and gives a satisfying growl when you dig in and play loud. General Specifications Nominal diameter 15" / 381mm Power rating 700W Nominal impedance 8Ω Sensitivity 97dB Chassis type Pressed steel Voice coil diameter 2.5" / 64mm Voice coil material Round copper Magnet type Ferrite Magnet Weight 1.6kh Former Material Polyimide Surround Cloth-sealed, Triple roll Frequency range 35 - 2,100Hz Mounting Information Cut-out diameter 13.9" / 353mm Diameter 15.15" / 385mm Gasket Front & Rear Mount Mounting slot dimensions 0.25" / 6.4mm Mounting slot PCD 14.5" / 370mm Number of mounting slots 8 Overall depth 6.6" / 168mm Unit weight 12lb / 5.4kg

Look inside the back of a standard 4x12 and you may well find a quartet of Rocket 50s. This 12 inch guitar speaker performs well with any playing style, and won't break the bank. General Specifications Nominal diameter 12", 305mm Power rating 50Wrms Nominal impedance 8? Sensitivity 95dB Chassis type Pressed steel Voice coil diameter 1.5", 38.1mm Voice coil material Round copper Magnet type Ceramic Magnet weight 17oz, 0.48kg Frequency range 85-5000Hz Resonance frequency, Fs 90Hz DC resistance, Re 6.74? Mounting Information Cut-out diameter 11.1", 283mm Diameter 12.2", 309mm Magnet structure diameter 3.9", 100mm Mounting slot dimensions 0.31",7.9mm Mounting slot PCD 11.7", 297mm Number of mounting slots 4 Overall depth 4.8", 122mm Unit weight 4.4lb, 2.0kg