Nanuk

Looking for custom foam for this case? CLICK HERE to be taken to mycasebuilder.co.nz where you can buy your case and design you own foam insert. Perfect for organizing, protecting and carrying your most important smaller gear, the NANUK 903 waterproof hard case is impenetrable and indestructible with a lightweight, tough resin shell and double side-mounted PowerClaw superior latching system. With Nanuk’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. Waterproof, dustproof, and indestructible, the 903 is ideal for batteries, lenses, smartphones, flash drives, hard drives, small cameras, microphone systems, small pistols, medical devices, first aid kits, emergency gear, sensitive instruments, electronic equipment or any other smaller personal or professional equipment that might need superior protection. The NANUK 903 protective case comes with a soft grip and ergonomic handle to make it easy to transport. It also features stainless steel hardware and integrated handle stay to keep the handle out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes, so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam or the case can be purchased empty. Specifications: Interior dimensions L188mm x W124mm x H79mm Exterior dimensions L231mm x W173mm x H97mm Weight (empty) 0.6 kg Lid depth 13mm Base depth 66mm Material lightweight NK-7 resin Max buoyancy 2.0 kg Temperature range Min: -29°C Max: 60°C Airline carry-on yes Water resistant* yes Warranty conditional lifetime guarantee

Looking for custom foam for this case? CLICK HERE to be taken to mycasebuilder.co.nz where you can buy your case and design you own foam insert. Perfect to organize, protect and carry your most important smaller gear, the NANUK 904 waterproof hard case is impenetrable and indestructible with a lightweight, tough resin shell and double side-mounted PowerClaw superior latching system. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. Waterproof, dustproof, and indestructible, the NANUK 904 is ideal for batteries, lenses, smartphones, flash drives, hard drives, cameras, microphone systems, small pistols, medical devices, first aid kits, emergency gear, sensitive instruments, electronic equipment or any other smaller personal or professional equipment that might need superior protection. The NANUK 904 protective case comes with a soft grip and ergonomic handle to make it easy to transport. It also features stainless steel hardware and integrated handle stay to keep the handle out of harm’s way when traveling or during shipping. This protective case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. The NANUK 904 MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam or the case can be purchased empty. Specifications: Interior dimensions L213mm x W152mm x H94mm Exterior dimensions L259mm x W201mm x H114mm Weight (empty) 0.7 kg Lid depth 20mm Base depth 74mm Material lightweight NK-7 resin Max buoyancy 3.3 kg Temperature range Min - 29°C Max - 60°C Airline carry-on yes Water resistant* yes Warranty conditional lifetime guarantee

Looking for custom foam for this case? CLICK HERE to be taken to mycasebuilder.co.nz where you can buy your case and design you own foam insert. Perfect to organize, protect and carry your bulkier but still compact items, the NANUK 905 waterproof hard case is impenetrable and indestructible with a lightweight, tough resin shell and double side-mounted PowerClaw superior latching system. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. Waterproof, dustproof, and indestructible, the NANUK 905 is ideal for batteries, lenses, smartphones, flash drives, hard drives, cameras, microphone systems, pistols, fishing gear, binoculars, scopes, tools or any other smaller personal or professional equipment that might need superior protection. The NANUK 905 protective case comes with a soft grip and ergonomic handle to make it easy to transport. It also features stainless steel hardware and integrated handle stay to keep the handle out of harm’s way when traveling or during shipping. It’s also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty. Specifications: Interior dimensions L336mm x W234mm x H104mm Exterior dimensions L363mm x W282mm x H120mm Weight (empty) 1.4 kg Lid depth 33mm Base depth 71mm Material lightweight NK-7 resin Max buoyancy 7.7 kg Temperature range Min: -29°C Max: 60°C Airline carry-on yes Water resistant* yes Warranty conditional lifetime guarantee

Looking for custom foam for this case? CLICK HERE to be taken to mycasebuilder.co.nz where you can buy your case and design you own foam insert. Organizing, protecting and carrying mid-size items is what the NANUK 908 does best. This waterproof hard case is impenetrable and indestructible and features a deep base for lots of storage options. A lightweight, tough resin shell and double side-mounted PowerClaw superior latching system ensure that nothing gets in. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. Waterproof, dustproof, and indestructible, the 908 is ideal for camera/video gear, batteries, lenses, flash drives, hard drives, microphone systems, pistols, fishing gear, binoculars, scopes, medical devices, instrumentation, industrial tools or any other small to medium personal or professional equipment that might need superior. The NANUK 908 protective case comes with a soft grip and ergonomic handle to make it easy to transport. It also features stainless steel hardware and integrated handle stay to keep the handle out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty. Specifications: Interior dimensions L241mm x W190mm x H190mm Exterior dimensions L318mm x W249mm x H203mm Weight (empty) 1.36 kg Lid depth 35mm Base depth 155mm Material lightweight NK-7 resin Max buoyancy 8.2 kg Temperature range Min -29°C Max 60°C Airline carry-on yes Water resistant* yes Warranty conditional lifetime guarantee

Looking for custom foam for this case? CLICK HERE to be taken to mycasebuilder.co.nz where you can buy your case and design you own foam insert. The slim profile of the NANUK 909 protective case makes it perfect for storing handguns, small drones, electronics and components or compact tools and equipment. It offers the perfect storage room for a small ultrabook laptop, tablet, sample kit, outdoor equipment, knives, small cameras, thinner accessories and more! Built to organize, protect, carry and survive tough conditions, the NANUK 909 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and its PowerClaw superior latching system. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. Lightweight, rugged and compact, the NANUK 909 hard case adapts to every environment. It’s favored by photographers, videographers, outdoor enthusiasts, sportsmen, law enforcement officers, military, hunters and shooting sports enthusiasts to protect their most valuable gear. The slim profile of the NANUK 909 protective case makes it perfect for storing handguns, small drones, electronics and components or compact tools and equipment. It offers the perfect storage room for a small ultrabook laptop, tablet, sample kit, outdoor equipment, knives, small cameras, thinner accessories and more! The NANUK 909 protective case comes with a soft grip and ergonomic handle to make it easy to transport. It also features stainless steel hardware and integrated handle stay to keep the handle out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam or the case can be purchased empty. Specifications Interior dimensions 291 mm x 178 mm x 93 mm Exterior dimensions 321 mm x 229 mm x 111 mm Weight (empty) 0.98 kg Lid depth 33 mm Base depth 60 mm Material lightweight NK-7 resin Internal Volume 5.2 L Max buoyancy 4.5 kg Temperature range Min -29°C Max 60°C Padlock Holes Diameter 0.300" Water resistant (IP67) Yes Airline check-in Yes Airline cabin carry-on Yes

Looking for custom foam for this case? CLICK HERE to be taken to mycasebuilder.co.nz where you can buy your case and design you own foam insert. Store, protect, and transport your valuable photo, electronic, or other gear with the waterproof and dustproof black 910 Case with Foam from NANUK . The case features a removable cubed form insert, and a foam piece for the inner lid. PowerClaw latches and holes for optional user-supplied padlocks provide secure closure. Users will appreciate the strong NK-7 resin construction, automatic pressure release valve, integrated lid stay, and large, folding, soft-grip handle. The 910 case is stackable with same-size cases. Internal Dimensions - L336mm x W234mm x H104mm External Dimensions - L363mm x W282mm x H120mm Automatic pressure valve guards against the vacuum caused by changes in altitude and geographic location that tend to seal watertight cases shut Pressure valve equalizes atmospheric pressure using micro vents which allow air to pass through, but prevent water from getting inside Waterproof custom-fit gasket, or seal, is made from high-quality EPDM rubber and resists deformation and fatigue NK-7 resin is UV-resistant to protect against discoloration and material degradation Molded-in bezel system includes detailing on the lower portion of the case for installing a panel kit without using a secondary bracket or drilling holes in the side of the case Bezel system accommodates an optional Waterproof Case Panel Kit or mounted electronic, measurement, or test equipment to use the case as an independent mobile test or control unit Integrated lid stay prevents lid from closing while you access your gear Grooves on the front interlock with built-in feet at the base when stacking multiple cases of the same size, which saves space for transport An optional padded divider insert can replace the foam insert, featuring removable touch-fastened dividers that provide compartmentalized and protective organization for your gear Specifications: Interior dimensions L336mm x W234mm x H104mm Exterior dimensions L363mm x W282mm x H120mm Weight (empty) 1.4 kg Lid depth 33mm Base depth 71mm Material lightweight NK-7 resin Max buoyancy 7.7 kg Temperature range Min -29°C Max 60°C Airline carry-on yes Water resistant* yes Warranty conditional lifetime guarantee

Looking for custom foam for this case? CLICK HERE to be taken to mycasebuilder.co.nz where you can buy your case and design you own foam insert. When traveling in less than hospitable environments or situations, protect your valuable gear with the black 915 Case with Foam from NANUK . It features Power-claw latches, two holes for user-supplied padlocks, a purge valve, and a bezel system to prevent water intrusion. Lightweight and waterproof, the case has an IP67 rating. Carry the case with the robust top handle. For convenience the handle and the lid will stay in an upright position. The pick-and-pluck foam interior allows for customised gear placement. Made of impact resistant NK-7 resin with stainless steel hardware, the case is strong, durable, and may be stacked. High performance gasket is ideal for protecting your equipment in extremely harsh weather conditions Waterproof & lightweight Paliockable Case made from impact-resistant NK-7 resin & 100% stainless steel hardware Crushproof & dustproof (IP67 rated) Automatic pressure release valve Molded-in bezel system Powerclaw Latching System Integrated lid stay Soft-grip foldable hanlie Stackable Meets airline carry-on regulations Specifications: Interior dimensions L351mm x W236mm x H157mm Exterior dimensions L401mm x W307mm x H173mm Weight (empty) 2.0 kg Lid depth 53mm Base depth 104mm Material lightweight NK-7 resin Max buoyancy 7.7 kg Temperature range Min -29°C Max 60°C Airline carry-on yes Water resistant* yes Warranty conditional lifetime guarantee

Looking for custom foam for this case? CLICK HERE to be taken to mycasebuilder.co.nz where you can buy your case and design you own foam insert. Store, transport, and protect your valuable gear from dirt, dust, moderate impact, and moisture with the 918 Case from Nanuk . This case has an IP67 rating, built-in purge valve, robust top handle, and a bezel system with an O-ring. Carry the 918 case with the top handle, or with an optional, sold-separately shoulder strap. For security, the case has holes to accommodate optional padlocks. Users will appreciate the handle and lid stays, as well as the impact-resistant, NK-7 resin construction, and stainless-steel hardware. Internal Dimensions - L378mm x W249mm x H218mm External Dimensions - L429mm x W328mm x H236mm Powerclaw latching system IP67-rated for water (submersion at 3 ft for 30 minutes) and dust resistance Made from impact-resistant NK-7 resin and stainless-steel hardware Two reinforced padlock inserts Integrated lid stay (110°) Overlapping lid including at rear of case Top and bottom panel mount Bezel system Removable hinge pin Handle stay Stackable Screw bosses in lid for mounting accessories Integrated shoulder strap attachment (strap not included) Specifications Interior dimensions L14.9″ x W9.8 x H8.6″ L378mm x W249mm x H218mm Exterior dimensions L16.9″ x W12.9″ x H9.3″ L429mm x W328mm x H236mm Weight (empty) 6.4 lbs | 2.9 kg Lid depth 2.1″ | 53mm Base depth 6.5″ | 165mm Material lightweight NK-7™ resin Max buoyancy 40 lbs | 18.1 kg Temperature range Min -20°F (-29°C ) Max 140°F (60°C) Airline carry-on yes Water resistant* yes Warranty conditional lifetime guarantee *Not for use when diving or swimming

Looking for custom foam for this case? CLICK HERE to be taken to mycasebuilder.co.nz where you can buy your case and design you own foam insert. When traveling through inhospitable environments or situations, be sure to protect your valuable gear with the black 920 Case with Foam from NANUK . A well-designed case, it features Powerclaw latches, two holes for user-supplied padlocks, purge valve, and a bezel system to prevent water intrusion. Lightweight and waterproof, the case has an IP67 rating. Carry the case with the robust top handle. For convenience the handle and the lid will stay in an upright position. The pick-and-pluck foam interior allows for customized gear placement. Made of impact resistant NK-7 resin with stainless steel hardware, the case is strong, durable, and may be stacked. Internal Dimensions - L381mm x W267mm x H157mm External Dimensions - L424mm x W340mm x H173mm High performance gasket is ideal for protecting your equipment in extremely harsh weather conditions Waterproof & lightweight Pad lockable Case made from impact-resistant NK-7 resin & 100% stainless steel hardware Crushproof & dustproof (IP67 rated) Automatic pressure release valve Molded-in bezel system Powerclaw latching system Integrated lid stay Soft-grip foldable handle Stackable Meets airline carry-on regulations Specifications Interior dimensions L381mm x W267mm x H157mm Exterior dimensions L424mm x W340mm x H173mm Weight (empty) 2.3 kg Lid depth 53mm Base depth 104mm Material lightweight NK-7 resin Max buoyancy 18.1 kg Temperature range Min -29°C Max 60°C Airline carry-on yes Water resistant* yes Warranty conditional lifetime guarantee *Not for use when diving or swimming

Looking for custom foam for this case? CLICK HERE to be taken to mycasebuilder.co.nz where you can buy your case and design you own foam insert. Sleek, stylish, and insanely rugged, the NANUK 923 boasts the same tough shell, patented PowerClaw superior latching system, and waterproof design as all Medium Cases, but it also comes with a few thoughtful features that make this the perfect case for your personal electronics. Rubber feet provide secure grip on all surfaces without scratching, while the two standard TSA locking latches protect your gear during your travels. The spring loaded handle retracts when not in use and the reinforced padlock eyelets add another layer of protection for your expensive equipment. Protection never looked so good. Each Nanuk case is stackable with other cases of the same size. Integrated feet on the rear of the case interlock with the front of the case, allowing for multiple cases to be safely stacked on top of each other to save space or for transport. The integrated bezel system on the lower portion of the case allows a panel kit to be easily installed, without having to install a secondary bracket or drill holes in the side of the case. The 923 case features an integrated lid that stays molded into the hinge and keeps the case lid open when you need it to stay open. The 923 Protective Case features a polyurethane foam. The multi-layered set of customizable inserts includes a pre-scored removable layer. This layer consists of foam squares that can be removed in various configurations to accommodate the contents of the case. This solution is suitable if you are seeking a quick and easy way to protect and organize your items. Internal Dimensions - L422mm x W287mm x H137mm External Dimensions - L472mm x W366mm x H161mm Automatic pressure release valve Molded-in bezel system Crushproof and dustproof Carabiner loop and belt loop Padlockable Stainless-steel hardware Protective lid cover Rubber bumpers IP65-rated water-resistant enclosure Splash-proof design to guard your gear from water damage and dust intrusion Specifications Interior dimensions 422mm x 287mm x 137mm Exterior dimensions 472mm x 366mm x 161mm Weight (empty) 2.7 kg Lid depth 46mm Base depth 91mm Material Lightweight NK-7 resin Max buoyancy 18.1 kg Temperature range Min -29°C Max 60°C Airline carry-on yes Water resistant* yes Warranty conditional lifetime guarantee

Designed to fit most 15" laptops, the NANUK 923 laptop case takes protection to a new level. The molded interior has been engineered to protect your laptop from the dangers of travel and use in potentially harmful environments while providing generous space for accessories and other necessities in both the lid and under the laptop. The included removable laptop sleeve offers an extra layer of protection and usability. Don't need the heavy-duty protection of the 923 case when you arrive at your destination? Simply take out the sleeve, hook on the Aircell™ shoulder strap and you are ready to go! The 923 Laptop is also the perfect solution for laptop check-in requirements. TSA compliant keyed latches keep your device safe but accessible to TSA agents if an inspection is required. Rugged, waterproof and dustproof, the NANUK 923 laptop case adapts to every environment for professionals who need extreme-duty protection whether it’s a board room or a job site. Built to organize, protect, carry and survive tough conditions, the 923 laptop waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and it’s PowerClaw superior latching system. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. The NANUK 923 laptop protective case comes with a soft grip and ergonomic handle to make it easy to transport. It also features stainless steel hardware and a spring-loaded handle to keep it out of harm’s way when traveling or during shipping. This case is also equipped with an automatic pressure release valve. For extra security, two latches feature an integrated TSA accepted key lock to keep your equipment securely locked during transit but accessible for inspection by the TSA when required. Specifications Interior dimensions 422mm x 287mm x 137mm Exterior dimensions 472mm x 366mm x 161mm Weight (empty) 2.7 kg Lid depth 46mm Base depth 91mm Material Lightweight NK-7 resin Max buoyancy 18.1 kg Temperature range Min -29°C Max 60°C Airline carry-on yes Water resistant* yes Warranty conditional lifetime guarantee

Looking for custom foam for this case? CLICK HERE to be taken to mycasebuilder.co.nz where you can buy your case and design you own foam insert. When traveling through inhospitable environments or situations, be sure to protect your valuable gear with the black 950 Case with Foam from NANUK . A well-designed case, it features Powerclaw latches, two holes for user-supplied padlocks, purge valve, and a bezel system to prevent water intrusion. Lightweight and waterproof, the case has an IP67 rating. Carry the case with the robust top handle. For convenience the handle and the lid will stay in an upright position. The pick-and-pluck foam interior allows for customized gear placement. Made of impact resistant NK-7 resin with stainless steel hardware, the case is strong, durable, and may be stacked. Internal Dimensions - L432mm x W300mm x H163mm External Dimensions - L475mm x W376mm x H178mm High performance gasket is ideal for protecting your equipment in extremely harsh weather conditions Waterproof & lightweight Pad lockable Case made from impact-resistant NK-7 resin & 100% stainless steel hardware Crushproof & dustproof (IP67 rated) Automatic pressure release valve Molded-in bezel system Powerclaw latching system Integrated lid stay Soft-grip foldable handle Stackable Meets airline carry-on regulations Specifications Interior dimensions L432mm x W300mm x H163mm Exterior dimensions L475mm x W376mm x H178mm Weight (empty) 2.8 kg Lid depth 53mm Base depth 108mm Material lightweight NK-7 resin Max buoyancy 24 kg Temperature range Min -29°C Max 60°C Airline carry-on yes Water resistant* yes Warranty conditional lifetime guarantee *Not for use when diving or swimming

Looking for custom foam for this case? CLICK HERE to be taken to mycasebuilder.co.nz where you can buy your case and design you own foam insert. When traveling in inhospitable environments or situations, be sure to protect your valuable gear in the black 930 Case with Foam from Nanuk . A well-designed case, it features PowerClaw latches, two holes for user-supplied padlocks, a purge valve, and a bezel system to prevent water intrusion. Lightweight and waterproof, the case has an IP67 rating. For added convenience, the robust top carrying handle and case lid both stay in place in an upright position. The pick-and-pluck foam interior allows for customized gear placement. Made of impact-resistant NK-7 resin with stainless steel hardware, the case is strong, durable, and may be stacked on other cases or containers full of gear. Internal Dimensions - L457mm x W330mm x H175mm External Dimensions - L503mm x W406mm x H193mm High performance gasket ideal for protecting your equipment from extremely harsh weather conditions Waterproof and lightweight Padlockable Case made from impact-resistant NK-7 resin and 100% stainless steel hardware Crushproof and dustproof (IP67-rated) Automatic pressure release valve Molded-in bezel system PowerClaw latching system Integrated lid stay Soft-grip foldable handle Stackable Meets airline carry-on regulations Specifications Interior dimensions L457mm x W330mm x H175mm Exterior dimensions L503mm x W406mm x H193mm Weight (empty) 3.2 kg Lid depth 53mm Base depth 121mm Material lightweight NK-7 resin Max buoyancy 29.5 kg Temperature range Min -29°C Max 60°C Airline carry-on yes Water resistant* yes Warranty conditional lifetime guarantee *Not for use when diving or swimming

Looking for custom foam for this case? CLICK HERE to be taken to mycasebuilder.co.nz where you can buy your case and design you own foam insert. The black, waterproof 933 Protective Equipment Case from Nanuk is a small crushproof hard case made from lightweight NK7 resin that protects and stores compact gear, such as cameras, lenses, video equipment or other equipment that requires extra depth. The dustproof case secures with the Powerclaw latching system, which includes a patented Powerclaw latch that uses compressive force to tightly clamp the case shut, plus an integrated slide lock that prevents the case from opening during transport or when dropped. The case features stainless steel hardware and can be carried using a foldable soft-grip handle at the top. Integrated stays in the handle keep it folded down, avoiding damage during transport or shipping. For additional comfort in transporting the case, an optional stretchable shoulder strap can be easily attached without extra hardware. Internal Dimensions - L457mm x W330mm x H241mm External Dimensions - L505mm x W409mm x H257mm Impact-resistant, lightweight, and rugged NK7 resin case built to absorb shocks IP67-rated water and dust resistance Integrates Powerclaw Latching System that clamps the case tightly closed using compressive force, while the integrated slide lock prevents the case from opening during transport or when dropped Spring loaded extra-large handle with handle stay Integrated shoulder strap attachment for comfort during travel Reinforced padlock insert Integrated Bezel system Integrated lid stay of 110 degrees prevents lid from closing while you access your gear Screw bosses in lid for mounting accessories Grooves on the front interlock with built-in feet at the base when stacking multiple cases of the same size, which saves space for transport Stainless steel hardware and removable hinge pin Top and bottom panel mount Specifications Interior dimensions L457mm x W330mm x H241mm Exterior dimensions L505mm x W409mm x H257mm Weight (empty) 8.0 lbs | 3.6 kg Lid depth 53mm Base depth 185mm Material lightweight NK7 resin Max buoyancy 65 lbs | 29.5 kg Temperature range Min -20°F (-29°C ) Max 140°F (60°C) Airline carry-on no Water resistant* yes Warranty conditional lifetime guarantee *Not for use when diving or swimming

Looking for custom foam for this case? CLICK HERE to be taken to mycasebuilder.co.nz where you can buy your case and design you own foam insert. The Protective 935 Case with Foam from Nanuk is a crushproof hard case made from lightweight NK-7 resin that will protect and store sensitive gear such as your DSLR with an attached lens, two additional lenses, and a flash. It includes a multi-layered cubed foam insert with pre-scored squares, which can be individually removed to accommodate the shape of your gear. When measuring your gear to the case, make sure to leave two inches around the perimeter to guard against impact. Internal Dimensions - 521 mm x 287 mm x 191 mm External Dimensions - 559 mm x 356 mm x 229 mm The dustproof case secures with the Powerclaw latching system, which includes a patented Powerclaw latch that uses compressive force to tightly clamp the case shut and an integrated slide lock to prevent the case from opening during transport, or when dropped. For additional security, there are hasps for adding optional 900-LOCK Padlocks or a tie lock when traveling. The case features stainless steel hardware, and can be carried using a retractable pull handle and wheels from the side or a spring loaded handle from the top. For additional comfort in transporting the case, an optional stretchable neoprene shoulder strap can be easily attached without extra hardware. Automatic pressure valve guards against the vacuum caused by changes in altitude and geographic location that tends to seal watertight cases shut Pressure valve equalizes atmospheric pressure using micro vents, which allow air to pass through, but prevent water from getting inside Waterproof, custom-fit gasket, or seal, is made from high-quality EPDM rubber and resists deformation and fatigue NK-7 resin is UV resistant to protect against discoloration and material degradation Molded-in bezel system includes detailing on the lower portion of the case for installing a panel kit without using a secondary bracket or drilling holes in the side of the case Bezel system accommodates an optional Waterproof Case Panel Kit or mounted electronic, measurement or test equipment to use case as independent mobile test or control unit Integrated lid stay prevents lid from closing while you access your gear Grooves on the front interlock with built-in feet at the base when stacking multiple cases of the same size, which saves space for transport An optional Padded Dividers Insert can replace the foam insert and features removable touch-fastened dividers providing compartmentalized and protective organization for your gear Specifications Interior dimensions L508mm x W356mm x H203mm Exterior dimensions L557mm x W429mm x H216mm Weight (empty) 3.8 kg Lid depth 53mm Base depth 150mm Material lightweight NK-7 resin Max buoyancy 36.3 kg Temperature range Min -29°C Max 60°C Airline carry-on no Water resistant* yes Warranty conditional lifetime guarantee *Not for use when diving or swimming

Nanuk 935 Lid Organiser: The NANUK Lid Organizer is the ideal organization and convenience accessory to add to your case. The molded interior is designed to help keep your hardware, power cords and accessories entirely organized and in-view. The lid organizer includes a set of mounting screws for easy, stress-free installation. Features include three or five zippered, transparent and anti-tear compartments of various sizes for lots of gear storage Features: Zippered & anti-tear compartments. The molded interior has been engineered to protect and maximize gear storage in the case. Keep your hardware and accessories organized.

Looking for custom foam for this case? CLICK HERE to be taken to mycasebuilder.co.nz where you can buy your case and design you own foam insert. The Protective 938 Case with Foam from Nanuk is a crushproof hard case made from lightweight NK-7 resin that will protect and store sensitive gear such as your DSLR with an attached lens, two additional lenses, and a flash. It includes a multi-layered cubed foam insert with pre-scored squares, which can be individually removed to accommodate the shape of your gear. When measuring your gear to the case, make sure to leave two inches around the perimeter to guard against impact. Internal Dimensions - 546 mm x 318 mm x 294 mm External Dimensions - L605 mm x W394 mm x H336 mm The dustproof case secures with the Powerclaw latching system, which includes a patented Powerclaw latch that uses compressive force to tightly clamp the case shut and an integrated slide lock to prevent the case from opening during transport, or when dropped. For additional security, there are hasps for adding optional 900-LOCK Padlocks or a tie lock when traveling. The case features stainless steel hardware, and can be carried using a retractable pull handle and wheels from the side or a spring loaded handle from the top. For additional comfort in transporting the case, an optional stretchable neoprene shoulder strap can be easily attached without extra hardware. Automatic pressure valve guards against the vacuum caused by changes in altitude and geographic location that tends to seal watertight cases shut Pressure valve equalizes atmospheric pressure using micro vents, which allow air to pass through, but prevent water from getting inside Waterproof, custom-fit gasket, or seal, is made from high-quality EPDM rubber and resists deformation and fatigue NK-7 resin is UV resistant to protect against discoloration and material degradation Molded-in bezel system includes detailing on the lower portion of the case for installing a panel kit without using a secondary bracket or drilling holes in the side of the case Bezel system accommodates an optional Waterproof Case Panel Kit or mounted electronic, measurement or test equipment to use case as independent mobile test or control unit Integrated lid stay prevents lid from closing while you access your gear Grooves on the front interlock with built-in feet at the base when stacking multiple cases of the same size, which saves space for transport An optional Padded Dividers Insert can replace the foam insert and features removable touch-fastened dividers providing compartmentalized and protective organization for your gear Specifications Interior dimensions 546 mm x 318 mm x 294 mm Exterior dimensions L605 mm x W394 mm x H336 mm Weight TBD Lid depth 53 mm Base depth 241 mm Material Lightweight NK-7 resin Internal volume TBD Max buoyancy TBD Temperature range Min -29°C Max 60°C Padlock Holes Diameter 0.340" Water resistant (IP67) Yes Warranty Conditional lifetime guarantee Airline check-in Yes Airline cabin carry-on Yes

Looking for custom foam for this case? CLICK HERE to be taken to mycasebuilder.co.nz where you can buy your case and design you own foam insert. When traveling in less-than-hospitable environments or situations, protect your valuable gear with the 940 Large Series Case from Nanuk . It is constructed from impact-resistant NK-7 resin, and features the patented PowerClaw latching system to keep your case tightly closed. Lightweight and waterproof, the IP67-rated case provides a watertight seal to keep your equipment dry and dust-free. An automatic pressure release value equalizes the interior of the case during changes in altitude, without compromising the watertight seal. The 940 Case can be carried using the folding top handle, or using a separately available shoulder strap that can be connected to the case by way of the integrated loops. The case is also designed to be easily stackable with other Nanuk 940 cases for convenient storage and transportation. For added security, the case can be padlock-closed using hasps molded directly onto the body. Internal Dimensions - L508mm x W356mm x H203mm External Dimensions - L557mm x W429mm x H216mm The integrated pressure relief valve allows the case to equalize to the surrounding pressure. This allows the case to vent without compromising its dustproof or water resistant capability if the air pressure around a closed case drops, such as when traveling on an airplane. Dustproof, water resistant, impact and vibration resistant. The case has a maximum buoyancy of 80 pounds, which means that depending on what is loaded inside, it will most likely float in water. Made of ultra-high impact structural resin that makes it extremely strong and durable. Specifications: Interior dimensions L508mm x W356mm x H203mm Exterior dimensions L557mm x W429mm x H216mm Weight (empty) 3.8 kg Lid depth 53mm Base depth 150mm Material lightweight NK-7 resin Max buoyancy 36.3 kg Temperature range Min -29°C Max 60°C Airline carry-on no Water resistant* yes Warranty conditional lifetime guarantee *Not for use when diving or swimming

Looking for custom foam for this case? CLICK HERE to be taken to mycasebuilder.co.nz where you can buy your case and design you own foam insert. Store, protect, and transport your valuable photo, electronic, or other gear with the waterproof and dustproof, 945 Case with Foam from NANUK . The case features a removable cubed foam insert, and a foam piece for the inner lid. PowerClaw latches and holes for optional user-supplied padlocks provide secure closure. Users will appreciate the strong NK-7 resin construction, automatic pressure release valve, integrated lid stay, and large, folding, soft-grip handle. The 945 case is stackable with same-size cases. Internal Dimensions - L559mm x W432mm x H208mm External Dimensions - L638mm x W505mm x H224mm Automatic pressure valve guards against the vacuum caused by changes in altitude and geographic location that tend to seal watertight cases shut Pressure valve equalizes atmospheric pressure using micro vents which allow air to pass through, but prevent water from getting inside Waterproof custom-fit gasket, or seal, is made from high-quality EPDM rubber and resists deformation and fatigue NK-7 resin is UV-resistant to protect against discoloration and material degradation Molded-in bezel system includes detailing on the lower portion of the case for installing a panel kit without using a secondary bracket or drilling holes in the side of the case Bezel system accommodates an optional Waterproof Case Panel Kit or mounted electronic, measurement, or test equipment to use the case as independent mobile test or control unit Integrated lid stay prevents lid from closing while you access your gear Grooves on the front interlock with built-in feet at the base when stacking multiple cases of the same size, which saves space for transport Specifications Interior dimensions L559mm x W432mm x H208mm Exterior dimensions L638mm x W505mm x H224mm Weight (empty) 4.8 kg Lid depth 53mm Base depth 155mm Material lightweight NK-7 resin Max buoyancy 54.4 kg Temperature range Min -29°C Max 60°C Airline carry-on no Water resistant* yes Warranty conditional lifetime guarantee *Not for use when diving or swimming

Looking for custom foam for this case? CLICK HERE to be taken to mycasebuilder.co.nz where you can buy your case and design you own foam insert. Waterproof, crushproof, dustproof, and buoyant with up to 110lb, Nanuk 's 950 Protective Rolling Case provides a durable and secure transport and shipping solution for your sensitive and valuable gear. Made of UV-protected NK-7 resin, the case resists discoloration and material degradation over time while being impact and temperature resistant. The case features the patented Powerclaw latching system that uses compressive force to tightly clamp the case shut and an integrated slide lock to prevent the case from accidental opening, even when dropped, and can accommodate padlocks for added security. Carry the case using the foldable soft-grip handle or wheel it with the aid of the retractable pull handle. Internal Dimensions - L521mm x W389mm x H257mm External Dimensions - L579mm x W465mm x H297mm UV-protected graphite NK-7 resin resists discoloration and material degradation 20.5x15.3x10.1" internal dimensions; Lid depth: 2.1"; Base depth: 8.0" IP67-rated, dustproof and submersible to 3.3' for up to 30 min Buoyant up to 110 lb maximum total weight Broad operating temperature of -20 to 140°F ATA 300 tested to be crushproof and impact resistant Automatic pressure valve: Prevents the vacuum caused by changes in altitude and geographic location that can seal watertight cases shut Specifications Interior dimensions L521mm x W389mm x H257mm Exterior dimensions L579mm x W465mm x H297mm Weight (empty) 6.8 kg Lid depth 53mm Base depth 203mm Material lightweight NK-7 resin Max buoyancy 49.9 kg Temperature range Min -29°C Max 60°C Airline carry-on no Water resistant* yes Warranty conditional lifetime guarantee *Not for use when diving or swimming

Looking for custom foam for this case? CLICK HERE to be taken to mycasebuilder.co.nz where you can buy your case and design you own foam insert. At 22 inches long and nearly 10 inches deep, the NANUK 955 can store a whole lot of your essentials. The NANUK 955 hard case offers the maximum level of protection for all of your professional equipment. The protective case adds the convenience of wheels to make traveling much easier with your audio gear, video gear, photo gear, industrial equipment, outdoor gear and much more! Three soft-grip handles make this wheeled case one of the most convenient on the market. The NANUK 955's polyurethane wheels withstand rough terrains while the one-handed retractable handle offers unparalleled usability. No matter where you go you're guaranteed a smooth ride. For total equipment protection, look no further than the NANUK 955's indestructible waterproof resin shell and patented superior PowerClaw latches. Trust the world™s best protective case to get your gear safely from point A to point B. Interior dimensions (L x W x H): 559 mm x 432 mm x 259 mm Material: Lightweight NK-7 resin Waterproof (IP67): Yes Warranty: Conditional lifetime guarantee Airline check-in: Yes Airline cabin carry-on: No Specifications Interior dimensions (L x W x H) 559 mm x 432 mm x 259 mm Exterior dimensions (L x W x H) 650 mm x 508 mm x 300 mm Weight TBD Lid depth 53 mm Base depth 206 mm Material Lightweight NK-7 resin Internal volume TBD Max buoyancy TBA Temperature range Min -29°C Max 60°C Padlock Holes Diameter 0.340" Water resistant (IP67) Yes Warranty Conditional lifetime guarantee Airline check-in Yes Airline cabin carry-on Yes *Check with your airline carrier before travelling

Looking for custom foam for this case? CLICK HERE to be taken to mycasebuilder.co.nz where you can buy your case and design you own foam insert. Waterproof, crushproof, dustproof, and buoyant, Nanuk 's 960 Protective Rolling Case with Foam Inserts provides a durable and secure transport and shipping solution for your sensitive and valuable gear. It comes with an egg crate foam lid insert, a solid bottom layer, and pre-scored foam layers. The lid and bottom layer help to prevent the contents from shifting, while the pre-scored layers enable you to customize it for your specific gear. Internal Dimensions - L559mm x W432mm x H328mm External Dimensions - L645mm x W508mm x H368mm The case is made of UV-protected NK-7 resin that resists discoloration and material degradation over time while being impact and temperature resistant. It features the patented Powerclaw latching system that uses compressive force to tightly clamp the case shut and an integrated slide lock to prevent the case from accidental opening, even when dropped, and can accommodate padlocks for added security. Carry the case using the foldable soft-grip handle or wheel it with the aid of the retractable pull handle. UV-protected black NK-7 resin resists discoloration and material degradation 22x17x12.9" internal dimensions; Lid depth: 2.1"; Base depth: 10.8" IP67-rated, dustproof and submersible to 3.3' for up to 30 min Buoyant up to 167.6 lb maximum total weight Broad operating temperature of -20 to 140°F ATA 300 tested to be crushproof and impact resistant Automatic pressure valve: Prevents the vacuum caused by changes in altitude and geographic location that can seal watertight cases shut Specifications Interior dimensions L559mm x W432mm x H328mm Exterior dimensions L645mm x W508mm x H368mm Weight (empty) 8.7 kg Lid depth 53mm Base depth 274mm Material lightweight NK-7 resin Max buoyancy 76 kg Temperature range Min -29°C Max 60°C Airline carry-on no Water resistant* yes Warranty conditional lifetime guarantee *Not for use when diving or swimming

Looking for custom foam for this case? CLICK HERE to be taken to mycasebuilder.co.nz where you can buy your case and design you own foam insert. Three soft-grip handles make this wheeled case one of the most convenient and comfortable on the market. The 963's polyurethane wheels handle rough terrain with ease while the one-handed retractable handle offers unparalleled usability. Built to organize, protect, carry and survive tough conditions, the NANUK 963 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and it’s five (5) PowerClaw latches. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. At 29 inches long and nearly 11 inches deep, the NANUK 963 can store a whole lot of your essentials. The NANUK 963 hard case offers the maximum level of protection for all of your personal and professional equipment. It adds the convenience of wheels to make traveling much easier with your photo gear, video gear, audio gear, medical or industrial equipment, outdoor gear and much more! For total equipment protection and loads of capacity, look no further than the NANUK 963 case retractable handle and wheels to get your gear safely from point A to point B. The NANUK 963 protective case comes with three (3) soft grip and ergonomic handles with stainless steel hardware and spring-loaded handles to keep them out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve. Interior dimensions: L 737 mm x W457 mm x H269 mm Material: Lightweight NK-7 resin Waterproof (IP67): Yes Warranty: Conditional lifetime guarantee Airline check-in: Yes Airline cabin carry-on: No Specifications: Interior dimensions L737 x W457 x H269 mm Exterior dimensions L826 x W533 x H312 mm Weight (empty) 10.2 kg Lid depth 53 mm Base depth 216 mm Material lightweight NK-7™ resin Max buoyancy 26.4 kg Temperature range Min -29°C Max 60°C Airline carry-on No Water resistant* yes Warranty conditional lifetime guarantee

Looking for custom foam for this case? CLICK HERE to be taken to mycasebuilder.co.nz where you can buy your case and design you own foam insert. The NANUK 965 is big and strong but surprisingly easy to maneuver. At 29” long and nearly 14” deep, it’s built to organize, protect, carry a whole lot of your essentials. This waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and five (5) PowerClaw latches. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. The NANUK 965 hard case will take extreme abuse with the maximum level of protection for all of your professional equipment. This protective case adds the convenience of a retractable handle and wheels that glide to make it easier to travel with your photo gear, video gear, audio gear, medical or industrial equipment, outdoor gear and much more! Three soft-grip handles make this wheeled case one of the most convenient and comfortable on the market. The NANUK 965's polyurethane wheels handle rough terrain with ease while the one-handed retractable handle offers unparalleled usability. The NANUK 965 protective case comes with three (3) soft grip and ergonomic handles with stainless steel hardware and spring-loaded handles to make hauling large loads easy. This transport case is also equipped with an automatic pressure release. Interior dimensions: L 737 mm x W457 mm x H356 mm Material: Lightweight NK-7 resin Waterproof (IP67): Yes Warranty: Conditional lifetime guarantee Airline check-in: Yes Airline cabin carry-on: No Specifications: Interior dimensions L737 x W457 x H356 mm Exterior dimensions L826 x W536 x H406 mm Weight (empty) 11.36 kg Lid depth 53 mm Base depth 302 mm Material lightweight NK-7™ resin Max buoyancy TBD Temperature range Min -29°C | Max 60°C Airline carry-on No Water resistant* yes Warranty conditional lifetime guarantee

Looking for custom foam for this case? CLICK HERE to be taken to mycasebuilder.co.nz where you can buy your case and design you own foam insert. With more than 275 cubic inches of capacity, the NANUK 968 waterproof case with a retractable handle and easy-glide wheels can store and haul a whole lot of gear. Built to organize, protect, carry and survive tough conditions, the 968 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and it’s six (6) PowerClaw latches. With NANUK’s exclusive locking and latching system, your case stays clamped shut and secured until you are ready to open it. The NANUK 968 hard case offers the maximum level of protection for all of your personal and professional equipment. This protective case adds the convenience of wheels to make it easier to travel with your photo gear, video gear, audio gear, bigger drones, medical or industrial equipment, outdoor gear and much more! Retractable handle and a set of wheels make this case one of the most convenient on the market. The NANUK 968's polyurethane wheels handle rough terrain with ease while the one-handed retractable handle offers unparalleled usability and comfort. The three (3) soft grip and ergonomic handles make the NANUK 968 easy to transport. They feature stainless steel hardware and spring loaded handles to keep them out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release. Interior dimensions: L 546 mm x W546 mm x H300 mm Material: Lightweight NK-7 resin Waterproof (IP67): Yes Warranty: Conditional lifetime guarantee Airline check-in: Yes Airline cabin carry-on: No Specifications: Interior dimensions L546 x W546 x H300 mm Exterior dimensions L610 x W627 x H345 mm Weight (empty) 9.76 kg Lid depth 58 mm Base depth 203 mm Material lightweight NK-7™ resin Max buoyancy TBD Temperature range Min -29°C | Max 60°C Airline carry-on No Water resistant* yes Warranty conditional lifetime guarantee

Looking for custom foam for this case? CLICK HERE to be taken to mycasebuilder.co.nz where you can buy your case and design you own foam insert. Measuring 610 mm x 610 mm x 361 mm inside, the NANUK 970 not only offers a maximum level of protection, but it also has a whole lot of storage capacity. It’s made to take the abuse so the equipment inside doesn’t. Built to organize, protect, carry and survive tough conditions, the 970 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and six (6) PowerClaw latches. With NANUK’s exclusive locking and latching system, your case stays clamped shut and secured until you are ready to open it. The NANUK 970 protective case adds the convenience of a retractable handle and super smooth wheels to make it easier to travel with personal and professional equipment be it photo gear, video gear, audio gear, commercial drones, medical or industrial equipment, outdoor gear and much more! Three soft-grip handles make this wheeled case one of the most convenient and easy-to-move on the market. The NANUK 970's polyurethane wheels handle rough terrain with ease while the one-handed retractable handle offers unparalleled usability, convenience and comfort. The three (3) soft grip and ergonomic handles feature stainless steel hardware and an integrated spring to keep the handles out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve. Interior dimensions: L 610 mm x W610 mm x H361 mm Material: Lightweight NK-7 resin Waterproof (IP67): Yes Warranty: Conditional lifetime guarantee Airline check-in: Yes Airline cabin carry-on: No *Check with your airline carrier before travelling Specifications: Interior dimensions L610 x W610 x H361 mm Exterior dimensions L699 x W691 x H406 mm Weight (empty) 11.92 kg Lid depth 58 mm Base depth 302 mm Material lightweight NK-7™ resin Max buoyancy TBD Temperature range Min -29°C | Max 60°C Airline carry-on No Water resistant* yes Warranty conditional lifetime guarantee

Looking for custom foam for this case? CLICK HERE to be taken to mycasebuilder.co.nz where you can buy your case and design you own foam insert. ABOUT THE NANUK 985 Internal Dimensions - L930 x W368 x H152 mm External Dimensions - L1010 x W440 x H168 mm Built to survive the outdoors, water, dust and abuse of all kinds the NANUK 985 is a clear favorite of sportsmen, sportswomen, hunters, law enforcement and the military due to its relatively compact size and its compatibility with firearms. In fact, this is the perfect size long case for civilian car and police cruiser trunks and fits a single rifle, AR-15, takedown shotgun and many other guns. The NANUK 985 features two spring-loaded handles and rolls smoothly on its polyurethane wheels also making it the perfect protection solution for photo and video pros who trust the NANUK 985 as a lighting kit travel case or a tripod hard case. Built to organize, protect, carry and survive tough conditions, the 985 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell. Its four (4) PowerClaw latches, two of which feature an integrated TSA accepted key lock, keep your equipment securely locked during transit but accessible for inspection by the TSA when required. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. his indestructible MIL-Spec case is equipped with a lid stay feature to keep the case safely open when in use and reinforced stainless-steel eyelets can be used to secure additional padlocks. The NANUK 985 protective case comes with a soft grip and ergonomic handle to make it easy and comfortable to transport. The handle features stainless steel hardware and is spring-loaded to keep it out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system. Download PDF Specifications Interior dimensions L930 mm x W368 mm x H152 mm Exterior dimensions L1010 mm x W440 mm x H168 mm Weight 7.2 kg Lid depth 41 mm Base depth 112 mm Material Lightweight NK-7 resin Internal volume 1.73 cu.ft (49 L) Max buoyancy 100 lb Temperature range Min -29°C Max 60°C Padlock Holes Diameter 0.340" Water resistant (IP67) Yes Warranty Conditional lifetime guarantee Airline check-in Yes Airline cabin carry-on No

Long, deep, rugged, and tough, NANUK 988 will protect and mobilize loads of gear with room to spare. It's built to go fast with stainless steel ball-bearing wheels and three spring-loaded handles that make it the perfect premium waterproof protective case to go anywhere. The 988 is part of our Configurable Series. The base model equipped with three (3) ultra-strong handles and two (2) strong polyurethane large wheels with stainless steel ball bearings is for any terrain. If your needs change, the wheel rigs on the 988 are removable and can be replaced by our custom corner caps. Like all NANUK waterproof protective cases, the 988 is made of NK7 resin and equipped with six (6) of our legendary PowerClaw latches. The 988 is indestructible and will never open accidentally. Molded with aggressive ribs and taller feet, it's highly stackable. Waterproof and dustproof, it's built so it can be thrown in the back of a pick-up, stacked on a pallet, taken to the set, or the range with confidence. Designed with a long and deep interior of 41.75" x 13.63’’x 12.5" (1060mm x 346mm x 318mm), it fits lighting equipment, tripods, camera equipment, telescopes, bunker gear, rifles, chainsaws, industrial equipment, and more. The 988 comes with our lifetime warranty, your assurance that we build cases to protect your most valuable gear for life. Additionally, a polycarbonate ID Window is available as an option. It attaches quickly and easily to the front of the 988. Other options include TSA Approved Latches as a retrofit kit, TSA Approved Padlocks, Panel Installation Kit, Multi-Layer Solid Foam, and Padded Dividers (Late availability). Specifications Interior dimensions 1140 mm x 413 mm x 344 mm Exterior dimensions 1060 mm x 346 mm x 318 mm Weight 10.9 kg Lid depth 70 mm Base depth 248 mm Material Lightweight NK-7 resin Max buoyancy 128.8 kg Temperature range Min -29°C Max 60°C Padlock Holes Diameter 0.340" Water resistant (IP67) Yes Warranty Conditional lifetime guarantee Airline check-in Yes Airline cabin carry-on No

Looking for custom foam for this case? CLICK HERE to be taken to mycasebuilder.co.nz where you can buy your case and design you own foam insert. ABOUT THE NANUK 990 Internal Dimensions - L1118 x W368 x H152 mm External Dimensions - L1196 x W440 x H168 mm A favorite of sportsmen, sportswomen, hunters, law enforcement and the military, the NANUK 990 is built to survive the outdoors, water, dust and abuse of all kinds. At 44 inches inside, this case perfectly fits a single AR-15 or similar rifle and pistol, or a takedown shotgun and accessories. This military-grade case is also commonly used by photo and video pros as a lighting kit travel case or a tripod hard case. The NANUK 990 features-two spring loaded handles and rolls smoothly on its polyurethane wheels. Built to organize, protect, carry and survive tough conditions, the 990 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell. Its four (4) PowerClaw latches, two of which feature an integrated TSA-accepted key lock, keep your equipment securely locked during transit but accessible for inspection by the TSA when required. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. This indestructible MIL-Spec case is equipped with a lid stay feature to keep the case safely open when in use and reinforced stainless-steel eyelets can be used to secure additional padlocks. The NANUK 990 protective case comes with two soft grip and ergonomic handles to make it easy and comfortable to transport. The handles feature stainless steel hardware and are spring-loaded to avoid harm way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve. Download PDF Specifications Interior dimensions L1118 x W368 x H152 mm Exterior dimensions L1196 x W440 x H168 mm Weight 8.1 kg Lid depth 41 mm Base depth 112 mm Material Lightweight NK-7 resin Internal volume 62.6 L Max buoyancy 65.8 kg Temperature range Min -29°C Max 60°C Padlock Holes Diameter 0.340" Water resistant (IP67) Yes Warranty Conditional lifetime guarantee Airline check-in Yes Airline cabin carry-on No

Our neoprene shoulder strap incorporates Aircellâ„¢ comfort technology to reduce fatigue when transporting your case. The shoulder strap can easily be attached to all NANUK cases without any additional hardware.

TSA Accepted lock offers the security of a padlock but can easily be opened and inspected by airport security and then locked again. The improved design of the TSA accepted lock makes it easier to install and fit on all our NANUK case models. For maximum security always use two locks per case.

COMING SOON Interior dimensions (L x W x H): 30.0″ x 21.0″ x 18.0″ Material: Lightweight NK-7 resin Waterproof (IP67): Yes Warranty: Conditional lifetime guarantee Airline check-in: Yes Airline cabin carry-on: No

COMING SOON Built for the outdoors, the extra long 995 is favored by law enforcement, the military, and avid sportsmen alike. The firearm case features 2 spring loaded handles and gets around smoothly with its polyurethane wheels. Waterproof, the 995 keeps your equipment secure and is equipped with a total of 4 patented PowerClaw latches including 2 TSA keyed locks. For extra security the TSA PowerClaw latches keep your equipment safely locked during transit but accessible for inspection by the TSA when required. Interior dimensions (L x W x H): 52.0 x 14.5” x 6.0″ Exterior dimensions (L x W x H): 55.1" x " x 6.6" Material: Lightweight NK-7 resin Waterproof (IP67): Yes Warranty: Conditional lifetime guarantee Airline check-in: Yes Airline cabin carry-on: No