Penn Elcom - Roadcase, Speaker Cabinet Hardware and 19" Racking

Pre cut rack strip, full hole, black, 18U - Sold as a pair. Mounting Equipment on Rails: -Use our new and innovative Clip Nuts on Rack Rails for an easy and economic alternative. -Also compatible with S1170 Captive Nuts, S11160 M6 Screws and S1940 and S1941 Cup Washers. Part No. R0863-18 Material 1.5mm Steel Finish Black Rack Units 18U

Pre cut rack strip, full hole, black, 16U - Sold as a pair. Mounting Equipment on Rails: -Use our new and innovative Clip Nuts on Rack Rails for an easy and economic alternative. -Also compatible with S1170 Captive Nuts, S11160 M6 Screws and S1940 and S1941 Cup Washers. Part No. R0863-16 Material 1.5mm Steel Finish Black Rack Units 16U

Pre cut rack strip, full hole, black, 14U - Sold as a pair. Mounting Equipment on Rails: -Use our new and innovative Clip Nuts on Rack Rails for an easy and economic alternative. -Also compatible with S1170 Captive Nuts, S11160 M6 Screws and S1940 and S1941 Cup Washers. Part No. R0863-14 Material 1.5mm Steel Finish Black Rack Units 14U

Pre cut rack strip, full hole, black, 12U - Sold as a pair. Mounting Equipment on Rails: -Use our new and innovative Clip Nuts on Rack Rails for an easy and economic alternative. -Also compatible with S1170 Captive Nuts, S11160 M6 Screws and S1940 and S1941 Cup Washers. Part No. R0863-12 Material 1.5mm Steel Finish Black Rack Units 12U

Pre cut rack strip, full hole, black, 10U - Sold as a pair. Mounting Equipment on Rails: -Use our new and innovative Clip Nuts on Rack Rails for an easy and economic alternative. -Also compatible with S1170 Captive Nuts, S11160 M6 Screws and S1940 and S1941 Cup Washers. Part No. R0863-10 Material 1.5mm Steel Finish Black Rack Units 10U

Pre cut rack strip, full hole, black, 8U - Sold as a pair. Mounting Equipment on Rails: -Use our new and innovative Clip Nuts on Rack Rails for an easy and economic alternative. -Also compatible with S1170 Captive Nuts, S11160 M6 Screws and S1940 and S1941 Cup Washers. Part No. R0863-08 Material 1.5mm Steel Finish Black Rack Units 8U

Pre cut rack strip, full hole, black, 6U - Sold as a pair. Mounting Equipment on Rails: -Use our new and innovative Clip Nuts on Rack Rails for an easy and economic alternative. -Also compatible with S1170 Captive Nuts, S11160 M6 Screws and S1940 and S1941 Cup Washers. Part No. R0863-06 Material 1.5mm Steel Finish Black Rack Units 6U

Pre cut rack strip, full hole, black, 5U - Sold as a pair. Mounting Equipment on Rails: -Use our new and innovative Clip Nuts on Rack Rails for an easy and economic alternative. -Also compatible with S1170 Captive Nuts, S11160 M6 Screws and S1940 and S1941 Cup Washers. Part No. R0863-05 Material 1.5mm Steel Finish Black Rack Units 5U

Pre cut rack strip, full hole, black, 4U - Sold as a pair. Mounting Equipment on Rails: -Use our new and innovative Clip Nuts on Rack Rails for an easy and economic alternative. -Also compatible with S1170 Captive Nuts, S11160 M6 Screws and S1940 and S1941 Cup Washers. Part No. R0863-04 Material 1.5mm Steel Finish Black Rack Units 4U

Pre cut rack strip, full hole, black, 3U - Sold as a pair. Mounting Equipment on Rails: -Use our new and innovative Clip Nuts on Rack Rails for an easy and economic alternative. -Also compatible with S1170 Captive Nuts, S11160 M6 Screws and S1940 and S1941 Cup Washers. Part No. R0863-03 Material 1.5mm Steel Finish Black Rack Units 3U

Pre cut rack strip, full hole, black, 2U - Sold as a pair. Mounting Equipment on Rails: -Use our new and innovative Clip Nuts on Rack Rails for an easy and economic alternative. -Also compatible with S1170 Captive Nuts, S11160 M6 Screws and S1940 and S1941 Cup Washers. Part No. R0863-02 Material 1.5mm Steel Finish Black Rack Units 2U

Full Hole Rack Rail with Square Holes. Cuts from 1 space 44.45mm to 45 spaces 2m are available. Please specify length (number of spaces) when ordering. Mounting Equipment on Rails: -Use our new and innovative Clip Nuts on Rack Rails for an easy and economic alternative. -Also compatible with S1170 Captive Nuts, SM6/HP M6 Screws and S1941 Cup Washers. Part No. R0863 Material 1.5mm Steel Finish Black Thickness 1.5mm Available Sizes From 1 Space to 45 Spaces Weight 0.9kg

2U 32 Amp AC Rack Mount PDU With 8 x Neutrik powerCon Sockets, Overload Protection & Power Monitoring 2U high Horizontal Mounting unit designed to provide versatile hook-up for the distribution of AC power within Multimedia Theatre & Touring rack applications. Circuit A: Main Input - C-FORM 240V 32A IP44 Panel Mount Appliance Inlet Protection - Illuminated Circuit Breaker overload protection between dual 16A sockets Output - C-FORM 240V 16A IP44 Panel Mount Appliance Outlet Circuit B: Output - 8 Neutrik powerCon sockets with a Maximum Combined Load 16A. Protection - Illuminated Circuit Breaker 16A overload protection LCD Monitor - LCD Power Monitor giving Voltage, Current, Power, Energy Levels & Overload Alarm. Earth Link - M4 Screw Terminal for Rack Grounding Usage: Nominal Voltage: 110V-240V Usable Voltages: 110V-240V full range Frequency: 50/60HZ full range Max. A/C Output: Current 16A Case Size: 88mm x 140mm x 430mm (O.A. 483mm) Weight: 2.5kg All components used in this conform to current RoHS, CE & UL certification - E&OE (EMI:EN55022 (CISPR22) Class B; EN61000-3-2,3 EMS:EN61000-4-2,3,4,5,6,8,11; Light industry level, criteria A) Specifications: Plug Type powerCON Size (U) 2U Weight 2.5kg

1U 16A 5 Channel Switched Power Distribution Unit. Cable Supplied: Type 1 (10A for Australia, New Zealand, China & Argentina) Limited to 10A maximum load. For 16A use, replace with 16amp Blue C form. This model in the PDU16 series is a 1U distributor with five switchable channels protected by an overload trip switch. Each numbered channel has a dedicated rocker switch with neon indicator light for quick and easy identification. The unit receives power through a C20 inlet and can output to five C13 / IEC outlets. Each unit comes supplied with one 1.8m power cable (choice of country type available) Specifications: Plug Type TYPE 1 (Australia, New Zealand, China & Argentina) Size (U) 1U Weight 3kg Finish Black

Corner Handle 1mm Tight Radius Part No. H2026 Material Steel Finish Zinc or Black Radius 1mm Weight 0.39Kg

Touring Grade Heavy Duty Rack Drawer with Slam Lock and Key Lock and integrated Front Pull Handle. Reinforced Rack Mounting Ears. Knock-Outs for Cable Access at the Rear. Rear Support Brackets R2292-RSB-KIT Included. Replacement Slam Latch available R1292-SLAM Part No. R2292-18-4UK Material 1.2mm Steel Finish Black Description 4U Internal Width 409mm Internal Depth 475mm (18") Internal Height 163mm

Touring Grade Heavy Duty Rack Drawer with Slam Lock and Key Lock and integrated Front Pull Handle. Reinforced Rack Mounting Ears. Knock-Outs for Cable Access at the Rear. Rear Support Brackets R2292-RSB-KIT Included. Replacement Slam Latch available R1292-SLAM Part No. R2292-10-4UK Material 1.2mm Steel Finish Black Description 4U Internal Width 409mm Internal Depth 275mm (10") Internal Height 119mm

Touring Grade Heavy Duty Rack Drawer with Slam Lock and Key Lock and integrated Front Pull Handle. Reinforced Rack Mounting Ears. Knock-Outs for Cable Access at the Rear. Rear Support Brackets R2292-RSB-KIT Included. Replacement Slam Latch available R1292-SLAM Part No. R2292-4UK Material 1.2mm Steel Finish Black Description 4U Internal Width 409mm Internal Depth 375mm (14") Internal Height 119mm

Touring Grade Heavy Duty Rack Drawer with Slam Lock and Key Lock and integrated Front Pull Handle. Reinforced Rack Mounting Ears. Knock-Outs for Cable Access at the Rear. Rear Support Brackets R2292-RSB-KIT Included. Replacement Slam Latch available R1292-SLAM Part No. R2292-18-3UK Material 1.2mm Steel Finish Black Description 3U Internal Width 409mm Internal Depth 475mm (189") Internal Height 119mm

Touring Grade Heavy Duty Rack Drawer with Slam Lock and Key Lock and integrated Front Pull Handle. Reinforced Rack Mounting Ears. Knock-Outs for Cable Access at the Rear. Rear Support Brackets R2292-RSB-KIT Included. Replacement Slam Latch available R1292-SLAM Part No. R2292-10-3UK Material 1.2mm Steel Finish Black Description 3U Internal Width 409mm Internal Depth 275mm (10") Internal Height 119mm

Touring Grade Heavy Duty Rack Drawer with Slam Lock and Key Lock and integrated Front Pull Handle. Reinforced Rack Mounting Ears. Knock-Outs for Cable Access at the Rear. Rear Support Brackets R2292-RSB-KIT Included. Replacement Slam Latch available R1292-SLAM Part No. R2292-3UK Material 1.2mm Steel Finish Black Description 3U Internal Width 409mm Internal Depth 375mm (14") Internal Height 119mm

Touring Grade Heavy Duty Rack Drawer with Slam Lock and Key Lock and integrated Front Pull Handle. Reinforced Rack Mounting Ears. Knock-Outs for Cable Access at the Rear. Rear Support Brackets R2292-RSB-KIT Included. Replacement Slam Latch available R1292-SLAM Part No. R2292-18-2UK Material 1.2mm Steel Finish Black Description 2U Internal Width 409mm Internal Depth 475mm (14") Internal Height 74mm

Touring Grade Heavy Duty Rack Drawer with Slam Lock and Key Lock and integrated Front Pull Handle. Reinforced Rack Mounting Ears. Knock-Outs for Cable Access at the Rear. Rear Support Brackets R2292-RSB-KIT Included. Replacement Slam Latch available R1292-SLAM Part No. R2292-2UK Material 1.2mm Steel Finish Black Description 2U Internal Width 409mm Internal Depth 355mm (14") Internal Height 74mm

Rubber Cable Feedthrough Dish 160mm x 160mm / 6.3" x 6.3" You can pass cabling that is stored inside the case coiled or on a spool through the rubber moulded flaps to hold it in place and prevent it from retreating back inside the case. With this dish, there’s no longer a need to take the cabling out or open the lid to unwind. Simply make the incisions you need along the pre-scored indentations to create one or several openings. Can be used as a single dish or as opposing pairs to create a larger space that can be reached into. Part No. D053510CMZ Finish Zinc Description Recessed Rubber Cable Feedthrough Dish

10A Horizontal Power Dish for Flight Case Built to specifically fit into flight cases, the 10A Flight Case Power Dish (Horizontal) was created for those who require power for additional equipment and access to electricity. The power dish can be used for: - Power distribution for mobile workstations including screen monitors and laptops - Charging battery equipment - Powering up-lighters, LED lighting or other external staging equipment within and outside the case Created to be used in: - Backstage settings - Outdoor settings - Mobile set-ups - Pop-ups and exhibitions The power dishes are easily mounted into any style of flight case, using the same technique as fitting a case handle or dish. There are horizontal (FCH) or vertical (FCV) mounting versions available. The low profile dish gives you the option once fitted, via a PowerCon connector on the front of the dish/case delivering mains power in and through a 10amp thermal breaker to a side loaded IEC chassis socket out situated on the rear of the dish and once fitted situated on the inside of the case. Technical Specifications - PowerCon Input NAC3MPXXA - 10A Thermal Breaker Switch - 10amp IEC Output - Dish Dimensions (OD): 178mm x 127mm x 68mm / 7.01" x 5" x 2.68" - Hole Cutout Dimensions: 148mm x 96mm / 5.83" x 3.78" - Available in two versions: Horizontal & Vertical Part No. PDU10-PCFCH Finish Black Description 10A Horizontal Power Dish Weight 0.6Kg

Vented Rack Shelf with CNC cut Magnetic Faceplates for a variety of SONOS Components. Custom Front Panels available for any piece of equipment on the market such as AV equipment or game consoles. Each Kit includes: - 1 x Vented Rack Shelf with Magnets for Faceplates - 1 x CNC cut Faceplates - 1 x Clamp Bar to help secure your equipment *SONOS Components NOT Included Part No. R1498/2UK-SONOS3 Material 1.2mm Steel Finish Black Size (U) 2U Application 3 x SONOS CONNECT Weight 3.2kg

Vented Rack Shelf with CNC cut Magnetic Faceplates for a variety of SONOS Components. Custom Front Panels available for any piece of equipment on the market such as AV equipment or game consoles. Each Kit includes: - 1 x Vented Rack Shelf with Magnets for Faceplates - 1 x CNC cut Faceplates - 1 x Clamp Bar to help secure your equipment *SONOS Components NOT Included Part No. R1498/2UK-SONOS2 Material 1.2mm Steel Finish Black Size (U) 2U Application 2 x SONOS CONNECT Weight 3.2kg

Vented Rack Shelf with CNC cut Magnetic Faceplates for a variety of SONOS Components. Custom Front Panels available for any piece of equipment on the market such as AV equipment or game consoles. Each Kit includes: - 1 x Vented Rack Shelf with Magnets for Faceplates - 1 x CNC cut Faceplates - 1 x Clamp Bar to help secure your equipment *SONOS Components NOT Included Part No. R1498/2UK-SONOS1 Material 1.2mm Steel Finish Black Size (U) 2U Application 1 x SONOS CONNECT Weight 3.2kg

Vented Rack Shelf with CNC cut Magnetic Faceplates for a variety of SONOS Components. Custom Front Panels available for any piece of equipment on the market such as AV equipment or game consoles. Each Kit includes: - 1 x Vented Rack Shelf with Magnets for Faceplates - 1 x CNC cut Faceplates - 1 x Clamp Bar to help secure your equipment *SONOS Components NOT Included Part No. R1498/3UK-S12090 Material 1.2mm Steel Finish Black Size (U) 2U Application 1 x SONOS CONNECT:AMP & 1 x SONOS CONNECT Weight 3.2kg

Vented Rack Shelf with CNC cut Magnetic Faceplates for a variety of SONOS Components. Custom Front Panels available for any piece of equipment on the market such as AV equipment or game consoles. Each Kit includes: - 1 x Vented Rack Shelf with Magnets for Faceplates - 1 x CNC cut Faceplates - 1 x Clamp Bar to help secure your equipment *SONOS Components NOT Included Part No. R1498/3UK-SONOSZP120 Material 1.2mm Steel Finish Black Size (U) 2U Application 2 x SONOS CONNECT:AMP Weight 3.2kg

Vented Rack Shelf with CNC cut Magnetic Faceplates for a variety of SONOS Components. Custom Front Panels available for any piece of equipment on the market such as AV equipment or game consoles. Each Kit includes: - 1 x Vented Rack Shelf with Magnets for Faceplates - 1 x CNC cut Faceplates - 1 x Clamp Bar to help secure your equipment *SONOS Components NOT Included Part No. R1498/3UK-SONOZP120S Material 1.2mm Steel Finish Black Size (U) 2U Application 1 x SONOS CONNECT:AMP Weight 3.2kg

Vented Rack Shelf with CNC cut Magnetic Faceplates for a variety of SONOS Components. Custom Front Panels available for any piece of equipment on the market such as AV equipment or game consoles. Each Kit includes: - 1 x Vented Rack Shelf with Magnets for Faceplates - 1 x CNC cut Faceplates - 1 x Clamp Bar to help secure your equipment *SONOS Components NOT Included Part No. R1498/2UK-SONAMPZP90 Material 1.2mm Steel Finish Black Size (U) 2U Application 1 x SONOS AMP & 1 x SONOS ZP90 Weight 3.2kg

Vented Rack Shelf with CNC cut Magnetic Faceplates for a variety of SONOS Components. Custom Front Panels available for any piece of equipment on the market such as AV equipment or game consoles. Each Kit includes: - 1 x Vented Rack Shelf with Magnets for Faceplates - 1 x CNC cut Faceplates - 1 x Clamp Bar to help secure your equipment *SONOS Components NOT Included Part No. R1498/2UK-SPORT3 Material 1.2mm Steel Finish Black Size (U) 2U Application 3 X SONOS PORT Weight 3.2kg

Vented Rack Shelf with CNC cut Magnetic Faceplates for a variety of SONOS Components. Custom Front Panels available for any piece of equipment on the market such as AV equipment or game consoles. Each Kit includes: - 1 x Vented Rack Shelf with Magnets for Faceplates - 1 x CNC cut Faceplates - 1 x Clamp Bar to help secure your equipment *SONOS Components NOT Included Part No. R1498/2UK-SPORT2 Material 1.2mm Steel Finish Black Size (U) 2U Application 2 X SONOS PORT Weight 3.2kg

Vented Rack Shelf with CNC cut Magnetic Faceplates for a variety of SONOS Components. Custom Front Panels available for any piece of equipment on the market such as AV equipment or game consoles. Each Kit includes: - 1 x Vented Rack Shelf with Magnets for Faceplates - 1 x CNC cut Faceplates - 1 x Clamp Bar to help secure your equipment *SONOS Components NOT Included Part No. R1498/2UK-SPORT1 Material 1.2mm Steel Finish Black Size (U) 2U Application 1 X SONOS PORT Weight 3.2kg

Vented Rack Shelf with CNC cut Magnetic Faceplates for a variety of SONOS Components. Custom Front Panels available for any piece of equipment on the market such as AV equipment or game consoles. Each Kit includes: - 1 x Vented Rack Shelf with Magnets for Faceplates - 1 x CNC cut Faceplates - 1 x Clamp Bar to help secure your equipment *SONOS Components NOT Included Part No. R1498/2UK-SONAMP1 Material 1.2mm Steel Finish Black Size (U) 2U Application 1 X SONOS AMP Weight 3.2kg