Skip to content

ARX - MIXX - 4 Channel Mic/line Mixer With 3 Band EQ & Zoning

by ARX
Currently Out Of Stock
$1,723.99
SKU MIXX

Innovation
ARX introduces the MIXX 4 channel Microphone/Line mixer,with 3 way EQ on all four channels, plus Balanced XLR master outputs on the rear. It's the companion product to the MIXXMaster: another innovative mixing product. Use the MIXX for more microphone channels; use the MIXXMaster for more line channels.

 

Great Features
Each Microphone/Line input on the MIXX has 3 way EQ and Pan controls, plus Balanced Low Noise Microphone pre-amps. All 4 Channels also have a direct output, ideal for recording applications.
Switchable Phantom power is available on all four Mic Inputs

AC Power
Both the MIXX and MIXXMaster models are available as a 100 to 120V AC model or a 220 to 240V AC model, and AC power is connected to the unit via a standard three pin IEC connector, with built-in fuse and voltage change switch.

With its superb audio quality, massive headroom and intuitive interface, the MIXXMaster and the MIXX series are the total solution to today’s install requirements.

Features 

  • Only 1 RU high
  • Balanced XLR Mic Inputs and Outputs
  • 3 way EQ and Pan controls
  • Switchable Phantom power
  • User friendly layout
  • Flawless performance in any audio environment

Applications

  • Sound Reinforcement
  • Industrial Paging/BGM Systems
  • AV Systems/CD/VIDEO
  • Clubs/Gyms/Karaoke/Restaurants
  • Studio, Live and Broadcast Submixers
  • Mic Pre-amp/Mixer for Hard disk recording, Modular Digital Multitrack, ADAT
Input Gain: Variable 20dB-60dB on each channel by rear panel trim control, plus Mic/Line input switch
Channel Level: Infinity to +6dB Gain
Channel Pan: True L and R constant level Control
Channel EQ: Low 100Hz 15dB Cut/Boost Shelving
Mid 800HZ 15dB Cut/Boost Bell, Broad Q
High 10KHz 15dB Cut/Boost Shelving
Frequency Response: 20-20KHz +or- 1dB
Distortion: Below .005% 100Hz to 10KHz
Master Outputs Signal/Noise: -90dB unweighted.
Phantom Power: +48VDC switchable on all Microphone Inputs
Microphone Inputs: Electronically Balanced XLR connector
Channel Outputs: 150 Ohms Line Level jack connector
Master Outputs:  Electronically Balanced XLR 300 ohms Line Level
Max Output Level: +20dB
AC Power: Supplied as 100-120 VAC model or 220-240 VAC model 50/60HZ 8VA (8 watts) 3 pin IEC connector with removable cable