Roadcase Hardware

Drawer Slides. Demountable. Sold in pairs. Part No. R2416Z Material Steel Closed Length 400mm Extension 402mm Load Capacity 45kg Weight 1.19kg

Drawer Slides. Demountable. Sold in pairs. Part No. R2412Z Material Steel Closed Length 300mm Extension 302mm Load Capacity 45kg Weight 0.89kg

Drawer Slides. Demountable. Sold in pairs. Part No. R2410 Z Material Steel Closed Length 250mm Extension 252mm Load Capacity 45kg Weight 0.74kg

Bracket for Rack Mounting Drawer Slides. Suits R2410Z - R2428Z Drawer Slides (not Included). Part No. R1209 /01 Material 1.5mm Steel Weight 76g

Pozidriv Pan Head Screws (M6) Part No. S1165Z Material Zink Finish Black Thread M6 Length (L) 50mm Weight 11.6g

Divider Strip for 9mm Dividers. Part No. MX90755 Material 2.0mm Steel Length 755mm

Speaker Cabinet Coating - DuraTex Spray Grade: White Size - 1 Gallon (3.78 Litres) DuraTex is America's #1 Speaker Cabinet and Road Case Coating that's easy to apply, beautiful and tough. It's waterbased so application and cleanup is easy and requires NO solvents. DuraTex requires no special primers and is easily applied with Hopper Gun or HVLP Pressure pot spray system. DuraTex has tremendous adhesion to wood and other substrates. It can be spray applied to create a tough, beautiful, weather resistant and easily maintained texture surface. DuraTex was designed to provide beauty and protection to wood speaker cabinets, road cases and other applications at 100 square feet per gallon. DuraTex is a blend of highly technical polymers, and special LOW V.O.C coalescents for creating beautiful high relief spatter textures. Technical Info GENERAL INFORMATION: DuraTex is a high performance protective texture coating with tremendous adhesion to wood and other substrates. It can be spray applied to create a tough, beautiful, weather resistant and easily maintained texture surface. DuraTex was designed to provide beauty and protection to wood speaker cabinets, road cases and other applications. DuraTex is a blend of highly technical polymers, and special LOW V.O.C coalescents for creating beautiful high relief spatter textures. DuraTex requires no special primers and is easily applied with a brush or textured roller. AVAILABLE IN: Black or White, Spray or Roller Grade with Satin Finish CUSTOM COLORS ARE ALSO AVAILABLE! CONTACT US FOR DETAILS. TECHNICAL DATA (BLACK/WHITE) : V.O.C.: 0.46#/Gal. (55g/L) as packaged Solids by Weight: 44% / 63% Solids by Volume: 40% / 51% Viscosity: Roller Grade=25Kcps, Spray Grade=15Kcps Wt per Gallon: 9.0# / 11.5# Cleanup: Soap and Water on fresh material, and Xylene or Toluene on dried material SURFACE PREPARATION: All substrates must be clean and dry with no oils, silicones, waxes or other contaminants. Fill holes in wood substrate with DRYWALL SPACKLE, Bondo, wood filler or similar products or adhesion may be sacrificed. Sand surfaces before application and remove all sanding residue. Bare wood surfaces need not be primed; however a base coat of DuraTex can be applied as its own primer. APPLICATION: By ROLLER: Apply roller grade by brush or roller to evenly coat the surface. A heavy first coat followed by a lighter second coat will give a milder texture. A heavy second coat will produce a more aggressive texture. Adding a small amount of water to the product will reduce the texture profile and can provide more of an orange peel texture. By SPRAY: Apply spray grade by Hopper Gun, Pressure Pot HVLP or airless spray system in a complete even coat to the entire surface to completely seal and protect the surface. Once the base coat is dry, apply a spray texture coat by lowering the air break-up pressure. Spray pressures will be dependent on the type of spray equipment being used. Test the spray application technique first on a piece of cardboard and note pressure settings needed to accomplish the finish desired. Typical pressure pot base coat application uses only 15# of fluid pressure and 30# of air pressure. Texturing uses 20# of fluid pressure and only 5-10# of air pressure. Higher air pressure = smaller dots. Lower air pressure produces larger dots. Higher fluid pressure + Higher air pressure produces a smoother, orange peel surface. Multiple color spatters create a 'stone look' finish! Allow all materials to dry thoroughly through air drying or forced drying in a baking oven. Do not exceed temperatures of 150F for drying. Heating speeds up the curing process of DuraTex but normal air drying will accomplish the same finished result over time. (Oven heating is optional, but facilitates rapid production throughput.) Do not apply this product to damp surfaces or when surface temperature is or will be below 60F. and when Relative Humidity is above 70%. STORAGE: To store containers that have been previously opened, spray a fine mist of water onto the coating surface in the container before resealing the lid. This raises humidity levels in the container and can help prevent the product drying or skinning over in the container. HMIS RATINGS: HEALTH -1 FLAMMABILITY - 0 REACTIVITY - 0 PERS. PROT.: HANDLING B APPLICATION G CAUTIONS: KEEP FROM FREEZING. USE ONLY WITH ADEQUATE VENTILATION. WEAR NIOSH APPROVED ORGANIC VAPOR CARTRIDGE MASK WHEN APPLYING OR SANDING IN CONFINED AREA. DO NOT TAKE INTERNALLY. CLOSE CONTAINER AFTER EACH USE. KEEP OUT OF THE REACH OF CHILDREN! AVOID EYE AND SKIN CONTACT. WEAR GOGGLES. SHELF LIFE AT LEAST ONE YEAR WHEN STORED AT 75F IN ORIGINAL UNOPENED CONTAINERS.

Speaker Cabinet Coating DuraTex Roller Grade: White Size - 1 Gallon (3.78 Litres) DuraTex is America's #1 Speaker Cabinet Coating designed to provide beauty and protection to wood speaker cabinets and road cases. It's a "superior performance" Texture Coating that's easy to apply, beautiful and tough. DuraTex has tremendous adhesion to wood and other substrates. It rolls on easily with our special texture roller to create a tough, beautiful, weather resistant and easily maintained texture surface. DuraTex is a blend of highly technical polymers, and special LOW V.O.C coalescents for creating beautiful high relief, durable textures. DuraTex requires no special primers because it's self priming. Want to test drive this product before purchasing? Check out our DuraTex Trial Size Kit ? that will give you enough DuraTex to coat a couple 12" speaker cabs.

Duratex 4" Pro texture roller refills [2 pack]

Test Drive DuraTex Roller Grade before buying a whole gallon. OR it's just the right size for a smaller project or a recoat. We got creative and found a way to put the DuraTex in a bag and pack it in a box along with a texture roller so you'll have everything you need to give us a real good Test Run or to do that rehab you've wanted to do without having to buy a whole gallon. The Kit is just right to do 10 to 12 square feet of speaker cabinet surface ~ enough for a couple 18" x 12" x 12" cabinets with two full coats for each cabinet. Technical Info GENERAL INFORMATION: DuraTex is a high performance protective texture coating with tremendous adhesion to wood and other substrates. It can be spray applied to create a tough, beautiful, weather resistant and easily maintained texture surface. DuraTex was designed to provide beauty and protection to wood speaker cabinets, road cases and other applications. DuraTex is a blend of highly technical polymers, and special LOW V.O.C coalescents for creating beautiful high relief spatter textures. DuraTex requires no special primers and is easily applied with a brush or textured roller. AVAILABLE IN: Black or White, Spray or Roller Grade with Satin Finish CUSTOM COLORS ARE ALSO AVAILABLE! CONTACT US FOR DETAILS. TECHNICAL DATA (BLACK/WHITE) : V.O.C.: 0.46#/Gal. (55g/L) as packaged Solids by Weight: 44% / 63% Solids by Volume: 40% / 51% Viscosity: Roller Grade=25Kcps, Spray Grade=15Kcps Wt per Gallon: 9.0# / 11.5# Cleanup: Soap and Water on fresh material, and Xylene or Toluene on dried material SURFACE PREPARATION: All substrates must be clean and dry with no oils, silicones, waxes or other contaminants. Fill holes in wood substrate with DRYWALL SPACKLE, Bondo, wood filler or similar products or adhesion may be sacrificed. Sand surfaces before application and remove all sanding residue. Bare wood surfaces need not be primed; however a base coat of DuraTex can be applied as its own primer. APPLICATION: By ROLLER: Apply roller grade by brush or roller to evenly coat the surface. A heavy first coat followed by a lighter second coat will give a milder texture. A heavy second coat will produce a more aggressive texture. Adding a small amount of water to the product will reduce the texture profile and can provide more of an orange peel texture. By SPRAY: Apply spray grade by Hopper Gun, Pressure Pot HVLP or airless spray system in a complete even coat to the entire surface to completely seal and protect the surface. Once the base coat is dry, apply a spray texture coat by lowering the air break-up pressure. Spray pressures will be dependent on the type of spray equipment being used. Test the spray application technique first on a piece of cardboard and note pressure settings needed to accomplish the finish desired. Typical pressure pot base coat application uses only 15# of fluid pressure and 30# of air pressure. Texturing uses 20# of fluid pressure and only 5-10# of air pressure. Higher air pressure = smaller dots. Lower air pressure produces larger dots. Higher fluid pressure + Higher air pressure produces a smoother, orange peel surface. Multiple color spatters create a "stone look" finish! Allow all materials to dry thoroughly through air drying or forced drying in a baking oven. Do not exceed temperatures of 150F for drying. Heating speeds up the curing process of DuraTex but normal air drying will accomplish the same finished result over time. (Oven heating is optional, but facilitates rapid production throughput.) Do not apply this product to damp surfaces or when surface temperature is or will be below 60F. and when Relative Humidity is above 70%. STORAGE: To store containers that have been previously opened, spray a fine mist of water onto the coating surface in the container before resealing the lid. This raises humidity levels in the container and can help prevent the product drying or skinning over in the container. HMIS RATINGS: HEALTH -1 FLAMMABILITY - 0 REACTIVITY - 0 PERS. PROT.: HANDLING B APPLICATION G CAUTIONS: KEEP FROM FREEZING. USE ONLY WITH ADEQUATE VENTILATION. WEAR NIOSH APPROVED ORGANIC VAPOR CARTRIDGE MASK WHEN APPLYING OR SANDING IN CONFINED AREA. DO NOT TAKE INTERNALLY. CLOSE CONTAINER AFTER EACH USE. KEEP OUT OF THE REACH OF CHILDREN! AVOID EYE AND SKIN CONTACT. WEAR GOGGLES. SHELF LIFE AT LEAST ONE YEAR WHEN STORED AT 75F IN ORIGINAL UNOPENED CONTAINERS.

Test Drive DuraTex Roller Grade before buying a whole gallon. OR it's just the right size for a smaller project or a recoat. We got creative and found a way to put the DuraTex in a bag and pack it in a box along with a texture roller so you'll have everything you need to give us a real good Test Run or to do that rehab you've wanted to do without having to buy a whole gallon. The Kit is just right to do 10 to 12 square feet of speaker cabinet surface ~ enough for a couple 18" x 12" x 12" cabinets with two full coats for each cabinet. Technical Info GENERAL INFORMATION: DuraTex is a high performance protective texture coating with tremendous adhesion to wood and other substrates. It can be spray applied to create a tough, beautiful, weather resistant and easily maintained texture surface. DuraTex was designed to provide beauty and protection to wood speaker cabinets, road cases and other applications. DuraTex is a blend of highly technical polymers, and special LOW V.O.C coalescents for creating beautiful high relief spatter textures. DuraTex requires no special primers and is easily applied with a brush or textured roller. AVAILABLE IN: Black or White, Spray or Roller Grade with Satin Finish CUSTOM COLORS ARE ALSO AVAILABLE! CONTACT US FOR DETAILS. TECHNICAL DATA (BLACK/WHITE) : V.O.C.: 0.46#/Gal. (55g/L) as packaged Solids by Weight: 44% / 63% Solids by Volume: 40% / 51% Viscosity: Roller Grade=25Kcps, Spray Grade=15Kcps Wt per Gallon: 9.0# / 11.5# Cleanup: Soap and Water on fresh material, and Xylene or Toluene on dried material SURFACE PREPARATION: All substrates must be clean and dry with no oils, silicones, waxes or other contaminants. Fill holes in wood substrate with DRYWALL SPACKLE, Bondo, wood filler or similar products or adhesion may be sacrificed. Sand surfaces before application and remove all sanding residue. Bare wood surfaces need not be primed; however a base coat of DuraTex can be applied as its own primer. APPLICATION: By ROLLER: Apply roller grade by brush or roller to evenly coat the surface. A heavy first coat followed by a lighter second coat will give a milder texture. A heavy second coat will produce a more aggressive texture. Adding a small amount of water to the product will reduce the texture profile and can provide more of an orange peel texture. By SPRAY: Apply spray grade by Hopper Gun, Pressure Pot HVLP or airless spray system in a complete even coat to the entire surface to completely seal and protect the surface. Once the base coat is dry, apply a spray texture coat by lowering the air break-up pressure. Spray pressures will be dependent on the type of spray equipment being used. Test the spray application technique first on a piece of cardboard and note pressure settings needed to accomplish the finish desired. Typical pressure pot base coat application uses only 15# of fluid pressure and 30# of air pressure. Texturing uses 20# of fluid pressure and only 5-10# of air pressure. Higher air pressure = smaller dots. Lower air pressure produces larger dots. Higher fluid pressure + Higher air pressure produces a smoother, orange peel surface. Multiple color spatters create a "stone look" finish! Allow all materials to dry thoroughly through air drying or forced drying in a baking oven. Do not exceed temperatures of 150F for drying. Heating speeds up the curing process of DuraTex but normal air drying will accomplish the same finished result over time. (Oven heating is optional, but facilitates rapid production throughput.) Do not apply this product to damp surfaces or when surface temperature is or will be below 60F. and when Relative Humidity is above 70%. STORAGE: To store containers that have been previously opened, spray a fine mist of water onto the coating surface in the container before resealing the lid. This raises humidity levels in the container and can help prevent the product drying or skinning over in the container. HMIS RATINGS: HEALTH -1 FLAMMABILITY - 0 REACTIVITY - 0 PERS. PROT.: HANDLING B APPLICATION G CAUTIONS: KEEP FROM FREEZING. USE ONLY WITH ADEQUATE VENTILATION. WEAR NIOSH APPROVED ORGANIC VAPOR CARTRIDGE MASK WHEN APPLYING OR SANDING IN CONFINED AREA. DO NOT TAKE INTERNALLY. CLOSE CONTAINER AFTER EACH USE. KEEP OUT OF THE REACH OF CHILDREN! AVOID EYE AND SKIN CONTACT. WEAR GOGGLES. SHELF LIFE AT LEAST ONE YEAR WHEN STORED AT 75F IN ORIGINAL UNOPENED CONTAINERS.

Speaker Cabinet Coating - DuraTex Roller Grade: Deep Base for custom colors. Size - 1 Gallon (3.78 Litres) DuraTex is America's #1 Speaker Cabinet Coating designed to provide beauty and protection to wood speaker cabinets and road cases. It's a "superior performance" Texture Coating that's easy to apply, beautiful and tough. DuraTex has tremendous adhesion to wood and other substrates. It rolls on easily with our special texture roller to create a tough, beautiful, weather resistant and easily maintained texture surface. DuraTex is a blend of highly technical polymers, and special LOW V.O.C coalescents for creating beautiful high relief, durable textures. DuraTex requires no special primers because it's self priming. Technical Information GENERAL INFORMATION: DuraTex is a high performance protective texture coating with tremendous adhesion to wood and other substrates. It can be spray applied to create a tough, beautiful, weather resistant and easily maintained texture surface. DuraTex was designed to provide beauty and protection to wood speaker cabinets, road cases and other applications. DuraTex is a blend of highly technical polymers, and special LOW V.O.C coalescents for creating beautiful high relief spatter textures. DuraTex requires no special primers and is easily applied with a brush or textured roller. AVAILABLE IN: Black or White, Spray or Roller Grade with Satin Finish CUSTOM COLORS ARE ALSO AVAILABLE! CONTACT US FOR DETAILS. TECHNICAL DATA (BLACK/WHITE) : V.O.C.: 0.46#/Gal. (55g/L) as packaged Solids by Weight: 44% / 63% Solids by Volume: 40% / 51% Viscosity: Roller Grade=25Kcps, Spray Grade=15Kcps Wt per Gallon: 9.0# / 11.5# Cleanup: Soap and Water on fresh material, and Xylene or Toluene on dried material SURFACE PREPARATION: All substrates must be clean and dry with no oils, silicones, waxes or other contaminants. Fill holes in wood substrate with DRYWALL SPACKLE, Bondo, wood filler or similar products or adhesion may be sacrificed. Sand surfaces before application and remove all sanding residue. Bare wood surfaces need not be primed; however a base coat of DuraTex can be applied as its own primer. APPLICATION: By ROLLER: Apply roller grade by brush or roller to evenly coat the surface. A heavy first coat followed by a lighter second coat will give a milder texture. A heavy second coat will produce a more aggressive texture. Adding a small amount of water to the product will reduce the texture profile and can provide more of an orange peel texture. By SPRAY: Apply spray grade by Hopper Gun, Pressure Pot HVLP or airless spray system in a complete even coat to the entire surface to completely seal and protect the surface. Once the base coat is dry, apply a spray texture coat by lowering the air break-up pressure. Spray pressures will be dependent on the type of spray equipment being used. Test the spray application technique first on a piece of cardboard and note pressure settings needed to accomplish the finish desired. Typical pressure pot base coat application uses only 15# of fluid pressure and 30# of air pressure. Texturing uses 20# of fluid pressure and only 5-10# of air pressure. Higher air pressure = smaller dots. Lower air pressure produces larger dots. Higher fluid pressure + Higher air pressure produces a smoother, orange peel surface. Multiple color spatters create a "stone look" finish! Allow all materials to dry thoroughly through air drying or forced drying in a baking oven. Do not exceed temperatures of 150F for drying. Heating speeds up the curing process of DuraTex but normal air drying will accomplish the same finished result over time. (Oven heating is optional, but facilitates rapid production throughput.) Do not apply this product to damp surfaces or when surface temperature is or will be below 60F. and when Relative Humidity is above 70%. STORAGE: To store containers that have been previously opened, spray a fine mist of water onto the coating surface in the container before resealing the lid. This raises humidity levels in the container and can help prevent the product drying or skinning over in the container. HMIS RATINGS: HEALTH -1 FLAMMABILITY - 0 REACTIVITY - 0 PERS. PROT.: HANDLING B APPLICATION G CAUTIONS: KEEP FROM FREEZING. USE ONLY WITH ADEQUATE VENTILATION. WEAR NIOSH APPROVED ORGANIC VAPOR CARTRIDGE MASK WHEN APPLYING OR SANDING IN CONFINED AREA. DO NOT TAKE INTERNALLY. CLOSE CONTAINER AFTER EACH USE. KEEP OUT OF THE REACH OF CHILDREN! AVOID EYE AND SKIN CONTACT. WEAR GOGGLES. SHELF LIFE AT LEAST ONE YEAR WHEN STORED AT 75F IN ORIGINAL UNOPENED CONTAINERS.

SPEAKER CABINET COATING DURATEX ROLLER GRADE: L'Acoustics Brown Size - 1 Gallon (3.78 Litres) DuraTex is America's #1 Speaker Cabinet Coating designed to provide beauty and protection to wood speaker cabinets and road cases. It's a superior performance Texture Coating that's easy to apply, beautiful and tough. DuraTex has tremendous adhesion to wood and other substrates. It rolls on easily with our special texture roller to create a tough, beautiful, weather resistant and easily maintained texture surface. DuraTex is a blend of highly technical polymers, and special LOW V.O.C coalescents for creating beautiful high relief, durable textures. DuraTex? requires no special primers because it's self priming. Want to test drive this product before purchasing? Check out our DuraTex Trial Size Kit that will give you enough DuraTex to coat a couple 12" speaker cabs. TECHNICAL INFO GENERAL INFORMATION: DuraTex is a high performance protective texture coating with tremendous adhesion to wood and other substrates. It can be spray applied to create a tough, beautiful, weather resistant and easily maintained texture surface. DuraTex was designed to provide beauty and protection to wood speaker cabinets, road cases and other applications. DuraTex is a blend of highly technical polymers, and special LOW V.O.C coalescents for creating beautiful high relief spatter textures. DuraTex requires no special primers and is easily applied with a brush or textured roller. AVAILABLE IN: Black or White, Spray or Roller Grade with Satin Finish CUSTOM COLORS ARE ALSO AVAILABLE! CONTACT US FOR DETAILS. TECHNICAL DATA? (BLACK/WHITE) : V.O.C.: 0.46#/Gal. (55g/L) as packaged Solids by Weight: 44% / 63% Solids by Volume: 40% / 51% Viscosity: Roller Grade=25Kcps, Spray Grade=15Kcps Wt per Gallon: 9.0# / 11.5# Cleanup: Soap and Water on fresh material, and Xylene or Toluene on dried material SURFACE PREPARATION: All substrates must be clean and dry with no oils, silicones, waxes or other contaminants. Fill holes in wood substrate with DRYWALL SPACKLE, Bondo, wood filler or similar products or adhesion may be sacrificed. Sand surfaces before application and remove all sanding residue. Bare wood surfaces need not be primed; however a base coat of DuraTex can be applied as its own primer. APPLICATION: By ROLLER: Apply roller grade by brush or roller to evenly coat the surface. A heavy first coat followed by a lighter second coat will give a milder texture. A heavy second coat will produce a more aggressive texture. Adding a small amount of water to the product will reduce the texture profile and can provide more of an orange peel texture. By SPRAY: Apply spray grade by Hopper Gun, Pressure Pot HVLP or airless spray system in a complete even coat to the entire surface to completely seal and protect the surface. Once the base coat is dry, apply a spray texture coat by lowering the air break-up pressure. Spray pressures will be dependent on the type of spray equipment being used. Test the spray application technique first on a piece of cardboard and note pressure settings needed to accomplish the finish desired. Typical pressure pot base coat application uses only 15# of fluid pressure and 30# of air pressure. Texturing uses 20# of fluid pressure and only 5-10# of air pressure. Higher air pressure = smaller dots. Lower air pressure produces larger dots. Higher fluid pressure + Higher air pressure produces a smoother, orange peel surface. Multiple colour spatters create a stone look finish! Allow all materials to dry thoroughly through air drying or forced drying in a baking oven. Do not exceed temperatures of 150F for drying. Heating speeds up the curing process of DuraTex but normal air drying will accomplish the same finished result over time. (Oven heating is optional, but facilitates rapid production throughput.) Do not apply this product to damp surfaces or when surface temperature is or will be below 60F. and when Relative Humidity is above 70%. STORAGE: To store containers that have been previously opened, spray a fine mist of water onto the coating surface in the container before resealing the lid. This raises humidity levels in the container and can help prevent the product drying or skinning over in the container. HMIS RATINGS: HEALTH -1 FLAMMABILITY - 0 REACTIVITY - 0 PERS. PROT.: HANDLING B APPLICATION G CAUTIONS: KEEP FROM FREEZING. USE ONLY WITH ADEQUATE VENTILATION. WEAR NIOSH APPROVED ORGANIC VAPOUR CARTRIDGE MASK WHEN APPLYING OR SANDING IN CONFINED AREA. DO NOT TAKE INTERNALLY. CLOSE CONTAINER AFTER EACH USE. KEEP OUT OF THE REACH OF CHILDREN! AVOID EYE AND SKIN CONTACT. WEAR GOGGLES. SHELF LIFE AT LEAST ONE YEAR WHEN STORED AT 75F IN ORIGINAL UNOPENED CONTAINERS. TEXTURES Textures created with DuraTex include Heavy Orange Peel, Medium Orange Peel, Fine Orange Peel, Roller Grade Wild and Roller Grade.

Speaker Cabinet Coating - DuraTex Spray Grade: Black Size - 1 Gallon (3.78 Litres) DuraTex is America's #1 Speaker Cabinet and Road Case Coating that's easy to apply, beautiful and tough. It's waterbased so application and cleanup is easy and requires NO solvents. DuraTex requires no special primers and is easily applied with Hopper Gun or HVLP Pressure pot spray system. DuraTex has tremendous adhesion to wood and other substrates. It can be spray applied to create a tough, beautiful, weather resistant and easily maintained texture surface. DuraTex was designed to provide beauty and protection to wood speaker cabinets, road cases and other applications at 100 square feet per gallon. DuraTex is a blend of highly technical polymers, and special LOW V.O.C coalescents for creating beautiful high relief spatter textures. Technical Info GENERAL INFORMATION: DuraTex is a high performance protective texture coating with tremendous adhesion to wood and other substrates. It can be spray applied to create a tough, beautiful, weather resistant and easily maintained texture surface. DuraTex was designed to provide beauty and protection to wood speaker cabinets, road cases and other applications. DuraTex is a blend of highly technical polymers, and special LOW V.O.C coalescents for creating beautiful high relief spatter textures. DuraTex requires no special primers and is easily applied with a brush or textured roller. AVAILABLE IN: Black or White, Spray or Roller Grade with Satin Finish CUSTOM COLORS ARE ALSO AVAILABLE! CONTACT US FOR DETAILS. TECHNICAL DATA (BLACK/WHITE) : V.O.C.: 0.46#/Gal. (55g/L) as packaged Solids by Weight: 44% / 63% Solids by Volume: 40% / 51% Viscosity: Roller Grade=25Kcps, Spray Grade=15Kcps Wt per Gallon: 9.0# / 11.5# Cleanup: Soap and Water on fresh material, and Xylene or Toluene on dried material SURFACE PREPARATION: All substrates must be clean and dry with no oils, silicones, waxes or other contaminants. Fill holes in wood substrate with DRYWALL SPACKLE, Bondo, wood filler or similar products or adhesion may be sacrificed. Sand surfaces before application and remove all sanding residue. Bare wood surfaces need not be primed; however a base coat of DuraTex can be applied as its own primer. APPLICATION: By ROLLER: Apply roller grade by brush or roller to evenly coat the surface. A heavy first coat followed by a lighter second coat will give a milder texture. A heavy second coat will produce a more aggressive texture. Adding a small amount of water to the product will reduce the texture profile and can provide more of an orange peel texture. By SPRAY: Apply spray grade by Hopper Gun, Pressure Pot HVLP or airless spray system in a complete even coat to the entire surface to completely seal and protect the surface. Once the base coat is dry, apply a spray texture coat by lowering the air break-up pressure. Spray pressures will be dependent on the type of spray equipment being used. Test the spray application technique first on a piece of cardboard and note pressure settings needed to accomplish the finish desired. Typical pressure pot base coat application uses only 15# of fluid pressure and 30# of air pressure. Texturing uses 20# of fluid pressure and only 5-10# of air pressure. Higher air pressure = smaller dots. Lower air pressure produces larger dots. Higher fluid pressure + Higher air pressure produces a smoother, orange peel surface. Multiple color spatters create a ?stone look? finish! Allow all materials to dry thoroughly through air drying or forced drying in a baking oven. Do not exceed temperatures of 150F for drying. Heating speeds up the curing process of DuraTex but normal air drying will accomplish the same finished result over time. (Oven heating is optional, but facilitates rapid production throughput.) Do not apply this product to damp surfaces or when surface temperature is or will be below 60F. and when Relative Humidity is above 70%. STORAGE: To store containers that have been previously opened, spray a fine mist of water onto the coating surface in the container before resealing the lid. This raises humidity levels in the container and can help prevent the product drying or skinning over in the container. HMIS RATINGS: HEALTH -1 FLAMMABILITY - 0 REACTIVITY - 0 PERS. PROT.: HANDLING B APPLICATION G CAUTIONS: KEEP FROM FREEZING. USE ONLY WITH ADEQUATE VENTILATION. WEAR NIOSH APPROVED ORGANIC VAPOR CARTRIDGE MASK WHEN APPLYING OR SANDING IN CONFINED AREA. DO NOT TAKE INTERNALLY. CLOSE CONTAINER AFTER EACH USE. KEEP OUT OF THE REACH OF CHILDREN! AVOID EYE AND SKIN CONTACT. WEAR GOGGLES. SHELF LIFE AT LEAST ONE YEAR WHEN STORED AT 75F IN ORIGINAL UNOPENED CONTAINERS.

Speaker Cabinet Coating DuraTex Roller Grade: Black Size - 1 Gallon (3.78 Litres) DuraTex is America's #1 Speaker Cabinet Coating designed to provide beauty and protection to wood speaker cabinets and road cases. It's a "superior performance" Texture Coating that's easy to apply, beautiful and tough. DuraTex has tremendous adhesion to wood and other substrates. It rolls on easily with our special texture roller to create a tough, beautiful, weather resistant and easily maintained texture surface. DuraTex is a blend of highly technical polymers, and special LOW V.O.C coalescents for creating beautiful high relief, durable textures. DuraTex requires no special primers because it's self priming. Want to test drive this product before purchasing? Check out our DuraTex Trial Size Kit that will give you enough DuraTex to coat a couple 12 speaker cabs. Technical Info GENERAL INFORMATION: DuraTex is a high performance protective texture coating with tremendous adhesion to wood and other substrates. It can be spray applied to create a tough, beautiful, weather resistant and easily maintained texture surface. DuraTex was designed to provide beauty and protection to wood speaker cabinets, road cases and other applications. DuraTex is a blend of highly technical polymers, and special LOW V.O.C coalescents for creating beautiful high relief spatter textures. DuraTex requires no special primers and is easily applied with a brush or textured roller. AVAILABLE IN: Black or White, Spray or Roller Grade with Satin Finish CUSTOM COLORS ARE ALSO AVAILABLE! CONTACT US FOR DETAILS. TECHNICAL DATA (BLACK/WHITE) : V.O.C.: 0.46#/Gal. (55g/L) as packaged Solids by Weight: 44% / 63% Solids by Volume: 40% / 51% Viscosity: Roller Grade=25Kcps, Spray Grade=15Kcps Wt per Gallon: 9.0# / 11.5# Cleanup: Soap and Water on fresh material, and Xylene or Toluene on dried material SURFACE PREPARATION: All substrates must be clean and dry with no oils, silicones, waxes or other contaminants. Fill holes in wood substrate with DRYWALL SPACKLE, Bondo, wood filler or similar products or adhesion may be sacrificed. Sand surfaces before application and remove all sanding residue. Bare wood surfaces need not be primed; however a base coat of DuraTex can be applied as its own primer. APPLICATION: By ROLLER: Apply roller grade by brush or roller to evenly coat the surface. A heavy first coat followed by a lighter second coat will give a milder texture. A heavy second coat will produce a more aggressive texture. Adding a small amount of water to the product will reduce the texture profile and can provide more of an orange peel texture. By SPRAY: Apply spray grade by Hopper Gun, Pressure Pot HVLP or airless spray system in a complete even coat to the entire surface to completely seal and protect the surface. Once the base coat is dry, apply a spray texture coat by lowering the air break-up pressure. Spray pressures will be dependent on the type of spray equipment being used. Test the spray application technique first on a piece of cardboard and note pressure settings needed to accomplish the finish desired. Typical pressure pot base coat application uses only 15# of fluid pressure and 30# of air pressure. Texturing uses 20# of fluid pressure and only 5-10# of air pressure. Higher air pressure = smaller dots. Lower air pressure produces larger dots. Higher fluid pressure + Higher air pressure produces a smoother, orange peel surface. Multiple color spatters create a "stone look" finish! Allow all materials to dry thoroughly through air drying or forced drying in a baking oven. Do not exceed temperatures of 150F for drying. Heating speeds up the curing process of DuraTex but normal air drying will accomplish the same finished result over time. (Oven heating is optional, but facilitates rapid production throughput.) Do not apply this product to damp surfaces or when surface temperature is or will be below 60F. and when Relative Humidity is above 70%. STORAGE: To store containers that have been previously opened, spray a fine mist of water onto the coating surface in the container before resealing the lid. This raises humidity levels in the container and can help prevent the product drying or skinning over in the container. HMIS RATINGS: HEALTH -1 FLAMMABILITY - 0 REACTIVITY - 0 PERS. PROT.: HANDLING B APPLICATION G CAUTIONS: KEEP FROM FREEZING. USE ONLY WITH ADEQUATE VENTILATION. WEAR NIOSH APPROVED ORGANIC VAPOR CARTRIDGE MASK WHEN APPLYING OR SANDING IN CONFINED AREA. DO NOT TAKE INTERNALLY. CLOSE CONTAINER AFTER EACH USE. KEEP OUT OF THE REACH OF CHILDREN! AVOID EYE AND SKIN CONTACT. WEAR GOGGLES. SHELF LIFE AT LEAST ONE YEAR WHEN STORED AT 75F IN ORIGINAL UNOPENED CONTAINERS. Textures Textures created with DuraTex include Heavy Orange Peel, Medium Orange Peel, Fine Orange Peel, Roller Grade Wild and Roller Grade.

Speaker Cabinet Coating Acoust-X Sound Damping Coating Size - 1 Gallon (3.78 Litres) Acoust-X is a low density, high build, soft & flexible sound absorbing coating for speaker cabinet interiors that helps reduce unwanted bounce back, resonance and unwanted vibrations. Apply it within the speaker cabinet prior to assembling the components. Or use it between auto panels to cut down on vibration and distortion. Heavy bodied, yet creamy to apply. Dries quickly and is waterbased. Application Instructions: Substrate must be clean and dry before you apply Acoust-X For best results apply in two moderately thick layers and allow to dry between coats. A stippled surface is more sound dampening than a smooth surface, so don't worry about trying to smooth the coating out too much. Brush Application: Brush on a heavy coat at least 3 times heavier than typical paint and allow to dry. Dabbing in the wet material helps create a rougher, more efficient layer. Apply second coat if necessary after first coat has dried. Roller Application: Use a 3/4" nap and up to a 1-1/4" nap to create a thick, rough layer. Apply second coat if necessary after first coat has dried. Hopper Gun: Use a large orifice and allow the Acoust-X to spatter the inside of the cabinet. Do not try to make the coating smooth, it works best with a rougher finish. Coverage: Approximately 50 to 75 sq feet per gallon (At 50 square feet per gallon, the yield will be 23 dry mils of soft, flexible, sound absorbing coating). Technical Information TECHNICAL DATA: V.O.C.: 0.43#/Gal. (51g/L) Solids by Weight: 45% Solids by Volume: 76% Resin System: Acrylic Copolymer Weight per Gallon: 6.25# Color Medium Gray

Steel Recessed Castor with 100mm Diameter Blue Wheel. Part No. W2100 Material 1.5mm Steel Finish Zinc Recommended Load Capacity per Wheel 200kg Weight 0.75kg

50mm Wheel and Housing. Sold in pairs. Part No. W2001 Material Steel Description Set of 2 Recommended Load Capacity per Wheel 40kg Weight 0.26kg

Recessed Castor Dish. Part No. W0968 Z Material Steel Finish Zinc Description Recessed Castor Dish Weight 0.22kg

Castor Dish for 125mm, 100mm and Un-Braked 75mm Castors. Part No. W0962 Z Material Steel Finish PennBrite

50mm castor with integrated adjuster foot - Allows for fluid movement and height adjustments because the wheel and foot are built into the same part - Freely adjust the height of equipment by raising or lowering the hex nut with a wrench - Wheel castors operate to assist with moving equipment of heavy loads comfortably and safely Part No. W095 0 Material Steel Housing / Rubber Wheel Finish Zinc Description 50mm Castor/Foot Carrying Weight per Wheel 50kg Weight 0.37kg

Castor Plate to suit Heavy Duty Castors with 78.5mm x 106.5mm x 4mm Fits Castors W0990-V6 , W0985-V6 , W9000-V6 , W9008-V6 Retro Fit - Same Mounting Hole Configuration as Castor. (Castor not included) Part No. W0094 Material Aluminium Description Set of 4 Weight 0.68kg

Castor Plate to suit European Castors with 79mm x 104mm x 3.1mm Fits Castors W0990/80 and W0985/80 Retro Fit - Same Mounting Hole Configuration as Castor. (Castor not included) Part No. W0093 Material Aluminium Description Set of 4 Weight 0.66kg

Castor Plate to suit Castors with 78.5mm x 98.5mm x 2.5mm Top Plates Fits Castors W0980 and W0980/B Retro Fit - Same Mounting Hole Configuration as Castor. (Castor not included) Part No. W0090 Material Aluminium Description Set of 4 Weight 0.66kg

Livesound Hybrid Mating Extrusion for 7mm Panels (Reversible) - Full Lengths - 5 Meters. Sold By the Meter - Shipped in 1.5 meter lengths due to courier limitations. If you need longer lengths please contact us to arrange another freight option.

Livesound Angle aluminium extrusion 30mm x 30mm Full Length - 5 Meters. Sold By the Meter - Shipped in 1.5 meter lengths due to courier limitations. If you need longer lengths please contact us to arrange another freight option.

Livesound Angle aluminium extrusion 30mm x 30mm Full Length - 5 Meters. Sold By the Meter - Shipped in 1.5 meter lengths due to courier limitations. If you need longer lengths please contact us to arrange another freight option.

H-Shape Extension Extrusion Shipped in 2 meter lengths due to courier limitations. If you need longer lengths please contact us to arrange another freight option. Part No. E2367 Material Aluminium 6063-T5 Board Thickness 10mm Full Length 4m Weight 1.89kg

Hat-Shaped Divider Extrusion. Shipped in 2 meter lengths due to courier limitations. If you need longer lengths please contact us to arrange another freight option. Part No. E2226 Material Aluminium 6063-T5 Board Thickness 10mm Full Length 4m Weight 1.28kg

Trim U-Shape Shipped in 2 meter lengths due to courier limitations. If you need longer lengths please contact us to arrange another freight option. Part No. E2215 Material Aluminium 6063-T5 Board Thickness 9mm Full Length 4m Weight 0.66kg

Trim U-Shape Shipped in 2 meter lengths due to courier limitations. If you need longer lengths please contact us to arrange another freight option. Part No. E2210 Material Aluminium 6063-T5 Board Thicnkness 7mm Full Length 4m Weight 0.6kg

Livesound Hybrid Mating Extrusion for 10mm Panels (Reversible) - Sold by the Meter. - 5 Meter Lengths. Sold By the Meter - Shipped in 2 meter lengths due to courier limitations. If you need longer lengths please contact us to arrange another freight option.

Double Angle Extrusion. Shipped in 2 meter lengths due to courier limitations. If you need longer lengths please contact us to arrange another freight option. 30mm x 30mm Board thickness : 6.8mm Material: Aluminium 6063-T5 Part No. E0885 Length 4m Weight 1.6kg

Double Angle Extrusion Shipped in 2 meter lengths due to courier limitations. If you need longer lengths please contact us to arrange another freight option. Part No. E0875 Material Aluminium 6063-T5 Board Thickness 9mm - 10.5mm Leg Length 30mm x 30mm Length 4m Weight 1.65kg

Hybrid Extrusion Shipped in 2 meter lengths due to courier limitations. If you need longer lengths please contact us to arrange another freight option. Unequal legs, perfect for offset hardware Not Compatible with E2390 Part No. E0825 Material Aluminium 6063-T5 Board Thickness 10.3mm Full Length 4m Weight 0.96kg

Single Angle Extrusion Sold By the Meter - Shipped in 2 meter lengths due to courier limitations. If you need longer lengths please contact us to arrange another freight option. Part No. E0815 Material 1.5mm 6063-T5 Aluminium Leg Length 22mm Full Length 4m Weight 0.62kg