Penn Elcom - Roadcase, Speaker Cabinet Hardware and 19" Racking

Rubber Cable Feedthrough Dish Use the plain dish in a case panel or the offset dish over extrusion to create a convenient cable feedthrough aperture. You can pass cabling that is stored inside the case coiled or on a spool through the rubber moulded flaps to hold it in place and prevent it from retreating back inside the case. With this dish, there's no longer a need to take the cabling out or open the lid to unwind. Simply make the incisions you need along the pre-scored indentations to create one or several openings. Can be used as a single dish or as opposing pairs to create a larger space that can be reached into. Part No: D053710CMZ Finish: Zinc Description: Half Dish With Offset Material: Steel/Rubber

Rubber Cable Feedthrough Dish Use the plain dish in a case panel or the offset dish over extrusion to create a convenient cable feedthrough aperture. You can pass cabling that is stored inside the case coiled or on a spool through the rubber moulded flaps to hold it in place and prevent it from retreating back inside the case. With this dish, there’s no longer a need to take the cabling out or open the lid to unwind. Simply make the incisions you need along the pre-scored indentations to create one or several openings. Can be used as a single dish or as opposing pairs to create a larger space that can be reached into. Part No: D053010CMZ Finish: Zinc Description: Half Dish Material: Steel/Rubber

50mm / 1.97" Plug-In Castor Socket. Mates with Socket Part 5295 . Load Capacity 45.36kg/100lb Material: Steel/Rubber Part No. 5299 Finish Zinc Weight 23g

50mm / 1.97" Plug-In Castor with Soft Rubber Black Wheel. Mates with Socket Part 5299 . Load Capacity 45.36kg/100lb Material: Steel/Rubber Part No. 5295 Finish Zinc Weight 23g

Medium PennBrite Zinc Flat Corner 3 Mounting Holes Part No. C1186 Material 1.0mm Steel Finish PennBrite Internal Radius 2mm Weight 30g

Plain Medium Dish Part No. D0941Z Material 1.2mm Steel Dish Depth 13mm Weight 0.12kg

Large Plain Dish Part No. D2101Z Material 1.2mm Steel Finish Zink Dish Depth 16mm Weight 0.25kg

Universal rack mount bracket. To mount 19” racking equipment vertically on multiple wall surfaces or horizontally under many types of furniture such as tables or desks. Part No. R2510-3U Size (U) 3U Material Steel Finish Black Height 144.8mm Weight 1.54kg

Universal rack mount bracket. To mount 19” racking equipment vertically on multiple wall surfaces or horizontally under many types of furniture such as tables or desks. Part No. R2510-2U Size (U) 2U Material Steel Finish Black Height 100mm Weight 1.33kg

Universal rack mount bracket. To mount 19” racking equipment vertically on multiple wall surfaces or horizontally under many types of furniture such as tables or desks. Part No. R2510-1U Size (U) 1U Material Steel Finish Black Height 55.8mm Weight 1.14kg

Part No. R8800-70 Material Steel Description 19" Crossbar for use with R50335 and R50338 door hinge on drawer slide and R0883 Rack Strips NEW! Weight 0.55kg

19 Racking LCD mount has the following features: Mounts 12 to 22 Inch Monitors VESA Mounting Interface Standard Variable Depth Settings Part No. LCD04 Material 1.2mm Steel Size (U) 4U Finish Black

Flat Corner 3 Mounting Holes Part No. C1182Z Material 1.0mm Steel Finish PennBrite Internal Radius 1.5mm Weight 54g

Brace Ball Corner with 30mm Offset. 3 Mounting Holes. Part No. C1348/01 Material 1.5mm Steel Finish PennBrite Offset 30mm Stackable Female Internal Radius 1.5mm Weight 73g

6 Hole Brace with 30mm offset for double angle extrusion and 22mm offset for tongue and groove extrusion Dimensions: - 51.5mm x 42mm - Internal Radius: 1.5mm Part No. B1128 Material 1.2mm Steel Finish PennBrite Description Hole Brace Dimensions 51.5mm x 42mm Internal Radius 1.5mm Weight 35g

Medium MOL Latch in Offset Dish Part No. L907/928Z Material 1.2mm Steel Description Offset Dish Dish Depth 10mm Offset 27mm Maximum working load capacity 90kg Weight 0.22kg

Sidebar for R8800 Anti-Vibration Rack Mounting System. Part No. R8820/22 Material 1.5mm Steel Size 762mm / 30" Finish Black Powdercoat Weight 0.97kg

Sidebar for R8800 Anti-Vibration Rack Mounting System. Part No. R8820/22 Material 1.5mm Steel Size 562mm / 22.13" Finish Black Powdercoat Weight 0.67kg

Sidebar for R8800 Anti-Vibration Rack Mounting System. Part No. R8820/20 Material 1.5mm Steel Size 507mm / 19.96" Finish Black Powdercoat Weight 0.64kg

Sidebar for R8800 Anti-Vibration Rack Mounting System. Part No. R8820/18 Material 1.5mm Steel Size 462mm / 18.19" Finish Black Powdercoat Weight 0.52kg

Sidebar for R8800 Anti-Vibration Rack Mounting System. Part No. R8820/16 Material 1.5mm Steel Size 407mm / 16.02" Finish Black Powdercoat Weight 0.52kg

Hook for Slam -Lid System. Works with Slam Latch L2470, L2472 & L2471 , Extrusion E0490 and Corner C0675/30 Part No. P2472 Description Hook For Slam Latch Mating Hardware L2472 & L2471

Lockable Slam Latch for Slam -Lid System, with tabs so lid can be hooked on to side of the case. Easy assembly - Drill or route a finger hole and attach Slam Latch aligned on inside of the lid. To release lid insert finger and disengage the latch and pull the lid off. Can be used with Extrusion E0490 , Corner C0675/30 and Hook P2472 Part No. L2472 Description Slam Latch Mating Hardware P2472

Slam Latch f or Slam -Lid System, with tabs so lid can be hooked on to side of the case. Easy assembly - Drill or route a finger hole and attach Slam Latch aligned on inside of the lid. To release lid insert finger and disengage the latch and pull the lid off. Can be used with Extrusion E0490 , Corner C0675/30 and Hook P2472 Part No: L2471 Description: Slam Latch Mating Hardware: P2472

Corner extrusion. Available in 1 to 10 modules or 2m lengths. Material: Aluminium. Part No: Module: Length: Weight: 10301-20 1 Module 44mm 12g 10302-20 2 Modules 88mm 26g 10303-20 3 Modules 132mm 36g 10304-20 4 Modules 176mm 48g 10305-20 5 Modules 220mm 67g 10306-20 6 Modules 264mm 71g 10307-20 7 Modules 308mm 84g 10308-20 8 Modules 352mm 95g 10309-20 9 Modules 396mm 0.12kg 10310-20 10 Mod (19" Rackmount) 440mm 0.12kg 10345-20 2 Meter Length 2m 0.55kg

Slim Lid B ivet Protected Recessed Handle Double Sprung Part No. H7148K Material Steel Finish Black Weight 0.28kg

Single Angle Extrusion - Unequal legs. Shipped in 2 meter lengths due to courier limitations. If you need longer lengths please contact us to arrange another freight option. Part No. E0810 Material 1.5mm Aluminium 6063-T5 Leg Length 29.8mm x 19mm Full Length 4m Weight 0.83kg

Dual Fan Kit for Wall Mount Racks FT02-Q quiet fan kits are designed to be fitted in pre-punched WM and WMP wall mounted racks. A 1A universal PSU is supplied with the fan kit. Technical Specifications • Air movement: 150CFM (252m/h) @1,350RPM • Fan Dimensions: (OD) 120 x 120 x 25mm • Fan units: 2 x 9 Bladed 120mm / 4.72" Fans • Noise levels: 22.5dBA (0.3 Sone). • Power: 12V DC - 500mA • Power out: 2 x DC In/Out Sockets This Fan Unit can be controlled by our CRC-TEMP Standard Fixed 40°C (104°F) thermal sensor. Or it can be Digitally Controlled by our FT-DTC 1U Rack Mounting Thermostatic Controller. DC link cable: CRC-Link Part No FT02-Q Finish Black Description Dual Fan Kit Weight 0.4kg

218mm Leather Look Handle. Part No H1008-TAN Material Vinyl/Steel Finish TAN Description With Tan Stitching Carrying Capacity 100kg Fittings Zinc Weight 80g

218mm Leather Look Handle. Part No H1008-BROWN Material Vinyl/Steel Finish Brown Description With White Stitching Carrying Capacity 100kg Fittings Zinc Weight 80g

Strut Hinge. Part No. P1995S Material 1.0mm Stainless Steel Finish Stainless Weight 76g

Magnetic Fan Dust Filter Cover. (Sold in Pairs). Held in place with 4 Neodymium Magnets and can easily be removed for cleaning. Designed to fit over 120mm grilles on the FP02-Q-3U fan panel but also usable with most of our other fan trays. Technical Specifications: - N42 Neodymium Magnet - 0.44kg Pull each - 6mm Thick Reticulated Filter Foam 45 PPI Part No. CRC-LINK Finish Black Description Magnetic Fan Dust Filter Cover Dimensions 132mm x 132mm x 17mm Weight 0.2kg

Accessories for rack cooling systems: CRC-LINK 2.1mm to 2.1mm DC link cable for use with the 2000mA PSU or connect FT-DTC Digital Thermostatic Controller to other units Part No. CRC-LINK Finish Black Description 2.1mm to 2.1mm DC link cable

Accessories for rack cooling systems: CRC-TEMP Plug-in thermostat enables the fan to activate only when it reaches a certain temperature. This increases the efficiency of the unit and reduces noise to zero when it is not active. Part No. CRC-TEMP Finish Black Description Plug-in Thermostat

This 1U Rack Mountable Digital Thermostatic Controller can be used to monitor and control all of our low noise DC fan units: CoolRaC , FT01-Q , FT02-Q and FP02-Q-3U . The digital thermostat module features: Continuous rack temperature monitoring, settable fan run temperature control with LED indicator and over temperature alarm. Technical Specifications • Continuous temperature monitoring • Set & forget fan control • Fan run LED indicator • Over temperature alarm • 12V DC Input & Output 2.1 Sockets • Switched 12V DC at Maximum of 4A • Temperature Sensor Input Socket • Plug-in PTC sensor 1m / 39" lead • Dimensions (OD): 44.5mm x 483mm x 70mm Part No. FT-DTC Finish Black Description Digital Thermostatic Controller Weight 1kg

Penn Elcom brings you a new and quiet exhaust fan unit for flight case racking that is mounted into a Penn Elcom large dish for your convenience. The FT80-Q-FC regulates the enclosure’s temperature by expelling hot air, preventing thermal failure. Thermal failure is caused by many generic in-board fans that simply circulate hot air within the enclosure rather than expelling it. Low noise level 22.5dBA (0.3 sone) 28CFM (47.6m³/h) at 2000 RPM High static pressure 1 x 9 bladed 80mm / 3.15" fan 12V DC - 200mA 2 x DC in/out sockets Temperature sensor socket 500mA universal PSU supplied Combined weight of 400g / 0.88Lb Fluid bearings = 2 year limited warrantee A second unit can also be run from the 500mA power supply by using a CRC-LINK cable. Thermal sensor accessory included, the CRC-TEMP can be Plugged into the TEMP socket. Part No. FT80-Q-FC Finish Black Description Quiet Exhaust Solution for Flight Case Racks Dimensions 178mm x 127mm x 47.5mm Weight 0.4kg