19" Racking

Magnetic Fan Dust Filter Cover. (Sold in Pairs). Held in place with 4 Neodymium Magnets and can easily be removed for cleaning. Designed to fit over 120mm grilles on the FP02-Q-3U fan panel but also usable with most of our other fan trays. Technical Specifications: - N42 Neodymium Magnet - 0.44kg Pull each - 6mm Thick Reticulated Filter Foam 45 PPI Part No. CRC-LINK Finish Black Description Magnetic Fan Dust Filter Cover Dimensions 132mm x 132mm x 17mm Weight 0.2kg

Smoked Plexiglass Barn Doors for Credenza Wood Racks For use with Beech and Knotty Oak finish racks. Not compatible with Nebraska Oak and Tiepolo Walnut finishes. Assembly Guide Part No. Size (U) Description R8600-CZD4S 4U Smoked Plexiglass Barn Doors R8600-CZD6S 6U Smoked Plexiglass Barn Doors R8600-CZD8S 8U Smoked Plexiglass Barn Doors R8600-CZD12S 12U Smoked Plexiglass Barn Doors

Flat pack / knock-down 450mm Deep Beech Wood laminate rack kits with M6 threaded rack rails. Made from high quality 18mm laminate boards. Perfect for use in studios, offices, boardrooms, churches, etc. The mounting rails can be recessed up to 60mm for more space behind the door, additional R0863 rails can be fitted at the back. Set of 4 non-marking feet included. Optional smoked plexiglass Credenza Barn Doors and Credenza Full Width Doors available. Wall Mount Kit WMKCZ available. Dimensions: - Depth: 450mm - Width: 531mm Finish: Beech Part No. Finish Description Size (U) Height R8600-450-4U Beech Credenza Rack 4U 219mm R8600-450-6U Beech Credenza Rack 6U 308mm R8600-450-8U Beech Credenza Rack 8U 397mm R8600-450-12U Beech Credenza Rack 12U 575mm

250mm Deep Beech Wood laminate rack sleeves with M6 threaded rack rails. Made from high quality 18mm laminate boards. Perfect for use in studios, offices, boardrooms, churches, etc. The mounting rails can be recessed up to 60mm for more space behind the door, additional R0863 rails can be fitted at the back. Set of 4 non-marking feet included. Optional smoked plexiglass Credenza Barn Doors and Credenza Full Width Doors available for the 4U units only. Wall Mount Kit WMKCZ available. Dimensions: - Depth: 250mm - Width: 531mm Finish: Beech Part No. Finish Description Size (U) Height R8600-250-1U Beech Credenza Wood Rack Sleeve 1U 85mm R8600-250-2U Beech Credenza Wood Rack Sleeve 2U 129mm R8600-250-3U Beech Credenza Wood Rack Sleeve 3U 174mm R8600-250-4U Beech Credenza Wood Rack Sleeve 4U 219mm

1U Vertical Cable Retaining Clip (Sold as a Pair) Part No. CM01R Material Steel Finish Black Description Cable Retaining Clip

Rack cable manager, 1U Panel with 5 Plastic Rings for Cable Management. Part No. CMP-1U Material Steel/Plastic Finish Black Size (U) 1U Description 19" Ring Cable Manager

1U Cable Management Slotted Duct with Cover. A neat solution to cross patch wiring looms. Part No. CMP-SD Material Steel/Plastic Finish Black Description 1U with Black Plastic Slotted Duct

This is a very quiet 1U Hot Air Extraction Unit, which uses 3 miniature blowers to expel heat from any 19” equipment racks. Behind the 1U Escutcheon, the ergonomic 0.5U space design allows for the CoolRaC to be placed in between layers of equipment to pull heat directly away from the gear. Technical Specifications Low Noise: 22.3dBA (Ideal for Studio Racks & Churches) Power: 12V DC - 420mA Air movement: 120 CFM 1A Universal PSU included. Black Powder Coated 1mm Steel Construction Available accessories: This CoolRaC can be controlled by our CRC-TEMP Standard Fixed 40°C (104°F) thermal sensor. Or it can be Digitally Controlled with our FT-DTC 1U Rack Mounting Thermostatic Controller. DC link cable: CRC-Link Part No. COOLRAC -B Finish Black Description 1U Hot Air Extraction Unit Weight 1.83kg

Accessories for rack cooling systems: CRC-LINK 2.1mm to 2.1mm DC link cable for use with the 2000mA PSU or connect FT-DTC Digital Thermostatic Controller to other units Part No. CRC-LINK Finish Black Description 2.1mm to 2.1mm DC link cable

Accessories for rack cooling systems: CRC-TEMP Plug-in thermostat enables the fan to activate only when it reaches a certain temperature. This increases the efficiency of the unit and reduces noise to zero when it is not active. Part No. CRC-TEMP Finish Black Description Plug-in Thermostat

2U Rack Mountable Digital Thermostatically Controlled Quiet Fan Exhaust unit, for use in 19” equipment racks. It has been designed be fitted in-between equipment or at the top of the rack to expel hot air efficiently and quietly. Technical Specifications Continuous temperature monitoring Set & forget fan control Fan run LED indicator Over temperature alarm Temperature Sensor Input Socket Plug-in PTC sensor 1m lead Low Noise (24.4 dBA) 12V DC Operation - 500mA 3 x 9 Bladed Swiss 120mm Fans 220 CFM / 378m³/h Japan made Fluid Bearings Temperature Sensor Input Socket DC in/out sockets 1A universal PSU supplied Part No. CRC02-DTC Material Steel Finish Black Description Thermo Exhaust Blower Dimensions (OD): 44.5mm x 483mm x 222mm Weight 1.4kg

Replacement Barrel Lock & Key For RCXX600 Series Contractor Flat Pack Rack System Doors.

Lockable Vented Laptop Drawers. Internal dimensions listed in the table. Part No. EX-6101 B Material 1.2mm Steel Finish Black Internal Dimension (WxDxH) 350mm x 338mm x 45.6mm External Dimension (WxDxH) 376mm x 446mm x 55mm Weight 3.48kg

19" Rack Mountable 1U Vented Laptop/Tablet Drawer with Foam Wrist-Pad for support and rear cable access. Key lockable. Part No. EX-6301 B Material 1.2mm Steel Finish Black Description 19” Rack Laptop Drawer Internal Dimensions 338mm x 409mm x 40mm Height 1U Weight 4.76kg

19" Rack Mountable 1U Vented Laptop/Tablet Drawer with Foam Wrist-Pad for support and rear cable access. Key lockable. Part No. EX-6301 B Material 1.2mm Steel Finish Black Description 19” Rack Laptop Drawer Internal Dimensions 338mm x 409mm x 77.1mm Height 2U

Set of 4 Steel Adjuster Feet with M8 thread for Rack Enclosures. Use with R8230 Open Tower Rack System, R2020 Modular Rack Tower, R8200 Open Rack Tower System, R8400 - R8500 Flat Pack Rack System, R6400 and R6600 Wall Mount Racks.

Low noise 3U Heat Extraction Units are designed to be fitted into the front or back of a 19-inch rack to suck hot air out of an enclosure. As hot air rises the best results will be achieved by mounting them at the top of the cabinet. A DC-DC link socket is provided, so two or more units can be linked together; a higher power PSU must be used . Each extractor can also be controlled by a CRC-TEMP thermal sensor. Technical Specifications • Low Noise 22.5dBA (0.3 Sone) • Air movement: 200CFM (336m³/h) @1,350RPM • Dimensions: 483mm x 133.4mm x 55mm • 2 x 9 Bladed 120mm Fans • High Static Pressure • Power: 12V DC – 500mA / 2 x DC In/Out Sockets • 500mA universal PSU supplied • Fluid Bearings = 2 Year Limited Warrantee These extractor panels can be controlled by our CRC-TEMP Standard Fixed 40°C (104°F) thermal sensor. Or they can be Digitally Controlled by our FT-DTC 1U Rack Mounting Thermostatic Controller. Use AF-F12 Magnetic Fan Dust Filter Covers. Part No. FP02-Q-3U Finish Black Description 3U Heat Extraction Panel Weight 1.5kg

This 1U Rack Mountable Digital Thermostatic Controller can be used to monitor and control all of our low noise DC fan units: CoolRaC , FT01-Q , FT02-Q and FP02-Q-3U . The digital thermostat module features: Continuous rack temperature monitoring, settable fan run temperature control with LED indicator and over temperature alarm. Technical Specifications • Continuous temperature monitoring • Set & forget fan control • Fan run LED indicator • Over temperature alarm • 12V DC Input & Output 2.1 Sockets • Switched 12V DC at Maximum of 4A • Temperature Sensor Input Socket • Plug-in PTC sensor 1m / 39" lead • Dimensions (OD): 44.5mm x 483mm x 70mm Part No. FT-DTC Finish Black Description Digital Thermostatic Controller Weight 1kg

Quiet and versatile Rack Fan Unit. Easy switch from a 1U fan tray to a 6U blower. Can either draw in or expel air from the front or the back of the rack. Technical Specifications Low Noise (24.4 dBA) Power: 12V DC Operation - 450mA Air movement: 170 CFM 1A Universal PSU included Temperature Sensor Switch Socket DC in/out sockets Black Powder Coated 1mm Steel Construction Available accessories: This Fan Unit can be controlled by our CRC-TEMP S tandard Fixed 40 Degree thermal sensor. Or it can be Digitally Controlled by our FT-DTC 1U Rack Mounting Thermostatic Controller. DC link cable: CRC-Link Part No. FT01-Q Weight 1.6kg

Dual Fan Kit for Wall Mount Racks FT02-Q quiet fan kits are designed to be fitted in pre-punched WM and WMP wall mounted racks. A 1A universal PSU is supplied with the fan kit. Technical Specifications • Air movement: 150CFM (252m/h) @1,350RPM • Fan Dimensions: (OD) 120 x 120 x 25mm • Fan units: 2 x 9 Bladed 120mm / 4.72" Fans • Noise levels: 22.5dBA (0.3 Sone). • Power: 12V DC - 500mA • Power out: 2 x DC In/Out Sockets This Fan Unit can be controlled by our CRC-TEMP Standard Fixed 40°C (104°F) thermal sensor. Or it can be Digitally Controlled by our FT-DTC 1U Rack Mounting Thermostatic Controller. DC link cable: CRC-Link Part No FT02-Q Finish Black Description Dual Fan Kit Weight 0.4kg

Tinted PlexiGlass Full Width Doors with key lock for Credenza Wood Racks. For use with Beech and Knotty Oak finish racks. Not compatible with Nebraska Oak and Tiepolo Walnut finishes. Part No. Size (U) Description R8600-CZD4-FW 4U Smoked PlexiGlass Full Width Doors R8600-CZD6-FW 6U Smoked PlexiGlass Full Width Doors R8600-CZD8-FW 8U Smoked PlexiGlass Full Width Doors R8600-CZD12-FW 12U Smoked PlexiGlass Full Width Doors

M6 Flat Black Plastic Washer Part No. HSM6FW Material Plastic Finish Black Description M6 Plastic Washer

Self-Adhesive Ali/Plastic ID Strip. Part No. ID-STRIP Material Aluminium/Plastic Length 435mm Description Self Adhesive Plastic ID Strip

19 Racking LCD mount has the following features: Mounts 12 to 22 Inch Monitors VESA Mounting Interface Standard Variable Depth Settings Part No. LCD04 Material 1.2mm Steel Size (U) 4U Finish Black